Printable View
Nero used to work just fine here...but after a clean xp pro install every single mp3 write gives me a buffer underrun...
I have absolutely no idea why....
Aspi is v4.71.1
HP 8200i.(not that it should matter, it worked fine before)
thank fck for test burns...
Any ideas why this is happening??
Cheers
Have you installed your chipset drivers?
If you're motherboard an Intel chipset, then you will also need the "Intel Application Accelerator" (IDE Drivers).
it's an abit kt7a...
using the latest via drivers too..
Stab in the dark here - i had the same kind of problem. The way i solved it was to make sure the ide channel the cd-writer was installed on was set to DMA access mode and not PIO mode. Quick reboot and it worked fine. Worth a go.
Rob
I take it that's a bios option??
I'll check....cheers
what version u running as XP likes Nero 5.5.8.0 and above
steel
I'm using latest version(5599)
Checked bios options too, they seem fine..:confused:
I've managed to get a few DC discs burnt and an album earlier, but I have to use TOA to stand any chance of success..
If you can afford it, replace your writer with one that uses "Burn Proof" technology. You will never have buffer under runs with these drives. Sony drives certainly have this feature.
yeah, that's kinda the conclusion I'm coming to.
4x max sucks anyway.
Just seen this one cheap, LTR-40125S.
Any good??
right to change from DMA to PIO or vice versa in xp
go into device manager
IDE ATA/ATIPI controller
select the channel that the device is on and double click
goto advanced settings
and you can change transfer mode from there
hope that helps
yer i would change your writer m8 but u must have a decent machine to run 1 i have never seen anything lower than a 24x speed any lace now but u can get a 40x writer for 42 quid (well u can up here) at pc fair
yes, cheers..Quote:
Originally posted by Degszie
right to change from DMA to PIO or vice versa in xp
go into device manager
IDE ATA/ATIPI controller
select the channel that the device is on and double click
goto advanced settings
and you can change transfer mode from there
hope that helps
I never knew that. Was on pio
happy to be of help
also for those with dvdr104 if you get problems burning
yamaha recomend PIO for the 104