W447 coding retrofit/enabling

Thread: W447 coding retrofit/enabling

  1. kofi's Avatar

    kofi said:

    Default W447 coding retrofit/enabling

    Anyone with experiences using DTS Mon*co V*diamo or X@ntry even.
    on a W447 (Vito/Metris)
    stuff seems a bit scarce

    loads of info for a sprinter i.e. W906

    cheers
     
  2. Over Carl's Avatar

    Over Carl said:

    Default Re: W447 coding retrofit/enabling

    Let me know what vehicle you have and what you want to do and I can look into it.
     
  3. kofi's Avatar

    kofi said:

    Default Re: W447 coding retrofit/enabling

    Quote Originally Posted by Over Carl View Post
    Let me know what vehicle you have and what you want to do and I can look into it.
    2016 W447 Vito want to enable auto fold mirrors when locking with key currently manual folding
    I coded My previous W639 using Xentry (menu display conveniences ) F64
    also fuel remains in menu

    spiegel anklappen >>...
    thxs
     
  4. Over Carl's Avatar

    Over Carl said:

    Default Re: W447 coding retrofit/enabling

    Auto folding mirrors is normally easy to find in the front left/right door control modules, the question is whether Xentry will allow the change.

    I will look around when I get a moment to see if I can find the options you want.
     
  5. kofi's Avatar

    kofi said:

    Default Re: W447 coding retrofit/enabling

    cool Would be nice to put the C4 to work

    not in doors!

    some options in A1 IC but causes issues and errors when vorhanden/ein

    on the W639 it was enabled in IC and key dependencies in EZS I think


    that was on my 2014 van
    thxs
     
  6. Over Carl's Avatar

    Over Carl said:

    Default Re: W447 coding retrofit/enabling

    Sorry, very true, that feature probably is in IC not in DCM's, got mixed up with easy entry feature I had been playing with on my W220.

    About to go on the lash, but will look into the options in next couple of days to see what I can find.
     
  7. plug1's Avatar

    plug1 said:

    Default Re: W447 coding retrofit/enabling

    Carl im looking for Honda hds or any diagnosis sware that will
    Read the sub systems on a civ8 , specifically .the vsa, abs
     
  8. Over Carl's Avatar

    Over Carl said:

    Default Re: W447 coding retrofit/enabling

    Quote Originally Posted by kofi View Post
    cool Would be nice to put the C4 to work

    not in doors!

    some options in A1 IC but causes issues and errors when vorhanden/ein

    on the W639 it was enabled in IC and key dependencies in EZS I think


    that was on my 2014 van
    thxs

    Sorry I don't think X.. will help you, will be either V.. or D..

    Unfortunately I can't setup a simulation for stuff this new, but I have sussed that you will need to work with either IC447KIG1.smr-d or IC447KIG2.smr-d. If you can't connect to IC using either of those, try changing the CAN parameters.

    If that helps you and you crack it, please post back the solution. If you can't find anything interesting still post back and hopefully we can crack this eventually.
     
  9. kofi's Avatar

    kofi said:

    Default Re: W447 coding retrofit/enabling

    I will look at monaco more powerful than vedi@mo I have some data bases which hopefully have the sir-d you mention

    thxs new it was rare for mods on W447 apart from your average vid in motion and adblue removal etc

    all stuff seems to be W2xx related blue led on W205 ILS IS nice though
     
  10. kofi's Avatar

    kofi said:

    Default Re: W447 coding retrofit/enabling

    X will connect to IC but in adaptations after enabling I am sure key decencies is needed in conveniences which i have not found yet

    so will look at smr-d projects for all coding options