Close

Results 1 to 7 of 7
  1. #1
    DF PwNagE burner1's Avatar
    Join Date
    Apr 2005
    Location
    South West
    Posts
    7,568
    Thanks
    328
    Thanked:        676
    Karma Level
    1244

    Default Any pointers on cleaning up faded plastic bike panels

    Picking up a second hand Honda 125 scooter next week after it's been MOT'd. I've viewed the bike and it's fine apart from the side plastic panels being faded, presumably by the sunlight on them. Looked about the net regarding respray etc. and that's an option: albeit using rattle cans. Wondered if anyone has used products that could possibly bring back a bit of the original shine without spraying? I'm not expecting miracles but so many products about and promising the earth but would appreciate real on hands opinions. Thanks

  2. #2
    DF PlaYa MHP's Avatar
    Join Date
    Aug 2013
    Location
    The Clock End
    Posts
    522
    Thanks
    330
    Thanked:        310
    Karma Level
    90

    Default Re: Any pointers on cleaning up faded plastic bike panels

    Have you got any pics? If they're painted you my be able to cut the clear coat back and reapply. A vinyl rap may also be an option.

    Thanks to MHP

    burner1 (22nd May 2017) 


  3. #3
    DF VIP Member
    beansontoast's Avatar
    Join Date
    Jan 2001
    Location
    Korova
    Posts
    5,294
    Thanks
    678
    Thanked:        558
    Karma Level
    631

    Default Re: Any pointers on cleaning up faded plastic bike panels

    I watched an episode of Shed & Buried where they basically scraped the bleached layer off to reveal the original colour underneath, could be worth looking into before coating.
    No sympathy for the devil; keep that in mind. Buy the ticket, take the ride...

    Thanks to beansontoast

    burner1 (22nd May 2017) 


  4. #4
    DF Wh0re Warno's Avatar
    Join Date
    Nov 2007
    Location
    The toon
    Posts
    101
    Thanks
    64
    Thanked:        26
    Karma Level
    0

    Default Re: Any pointers on cleaning up faded plastic bike panels

    Can be done with a heat gun if its this type of trim



    I have also used gtechniq c4 which lasts around 1yr

    Sent from my Elephone P8000 using Tapatalk

    Thanks to Warno

    burner1 (22nd May 2017) 


  5. #5
    DF PwNagE burner1's Avatar
    Join Date
    Apr 2005
    Location
    South West
    Posts
    7,568
    Thanks
    328
    Thanked:        676
    Karma Level
    1244

    Default Re: Any pointers on cleaning up faded plastic bike panels

    Thanks chaps. I pick the bike up tomorrow so will ponder my options. It's a gloss red finish that looks a little metallic as well so probably not red all the way through but painted on. Might try something to take back the lacquer and see how that goes.

  6. #6
    DF VIP Member
    beansontoast's Avatar
    Join Date
    Jan 2001
    Location
    Korova
    Posts
    5,294
    Thanks
    678
    Thanked:        558
    Karma Level
    631

    Default Re: Any pointers on cleaning up faded plastic bike panels

    Quote Originally Posted by beansontoast View Post
    I watched an episode of Shed & Buried where they basically scraped the bleached layer off to reveal the original colour underneath, could be worth looking into before coating.
    Bit of a long shot but this is going to be on telly in about five minutes or less on the travel channel. It is series 2 episode 7 if you want to look it up later.
    No sympathy for the devil; keep that in mind. Buy the ticket, take the ride...

    Thanks to beansontoast

    burner1 (29th May 2017) 


  7. #7
    DF PwNagE burner1's Avatar
    Join Date
    Apr 2005
    Location
    South West
    Posts
    7,568
    Thanks
    328
    Thanked:        676
    Karma Level
    1244

    Default Re: Any pointers on cleaning up faded plastic bike panels

    Well, I picked the bike up other day and spent quite a bit of time the weekend tarting it up. Didn't have to really but I do enjoy farting about like that lol. After a lot of research and watching YT vids I got in a few more unusual products along with T-cut colour fast and Turtle wax. First was warm water and washing up liquid for an overall clean. Then I cleaned various parts with screwfix 'No Nonsense' degreaser, after that, a 50/50 mix of boiled Linseed oil and white spirit on the grey trim... took a couple of days to dry out proper but end result was ok. Seat was done with some Armoral semi matt protectant, this took quite a few layers but it's getting there. Colour fast red on the painted panels in layers over a couple of days and then the turtle wax for a few layers as well.

    Wheels were cleaned with Mr Muscle oven cleaner and cold rinsed/ brushed off with some elbow grease. Exhaust was cleaned with Harpic max 10 toilet cleaner, washed off and fine sanded a little, washed and wiped the sanding off and sprayed with Rustoleum BBQ high temp paint.. about 4 layers letting it dry between each one. Took some panels off to get at the main frame and sanded a few areas that had a little surface rust then painted with Hammerite smooth black - doesn't have to look pretty as you can't see it but helps in the long run.

    Next session will be the engine casing as it's looking a bit grimey but overall, pleased with the results so far.

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    [Only registered and activated users can see links. ]

    Thanks to burner1

    Ashley (30th May 2017) 


Similar Threads

  1. [HELP] Damaged clear coat and faded paint - DIY refurb
    By I Black Belt in forum Cars
    Replies: 1
    Last Post: 15th October 2014, 08:58 PM
  2. Parking Bay / Faded Yellow Lines Question
    By dannyboy in forum The Dog and Duck
    Replies: 20
    Last Post: 8th January 2013, 05:02 PM
  3. Replies: 51
    Last Post: 1st January 2009, 02:41 PM
  4. Replies: 20
    Last Post: 15th January 2006, 11:30 AM

Social Networking Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •