DIY Microserver alternative

Thread: DIY Microserver alternative

  1. Mystical_2K's Avatar

    Mystical_2K said:

    Default Re: DIY Microserver alternative

    Thanks everyone for the advice, I think i will probably go down the Unraid route, i havent actually used Seagate drives too much but my current NAS boxes have Western Digital Red drives in them so I suppose I should stick with the tried and tested regardless of the extra few pennies they will cost.

    Will definitely be asking you guys for advice once I get the server up and running, however probably looking like it will be done after Xmas due to (hopefully) moving house.

    The mrs is letting me keep some money back from the house sale so that I can upgrade my servers so I may end up upgrading the drives in my 2x Gen8 servers and selling off my 8TB N54L
    You know he grew up as a little shitspark from the old shitflint and then he turned into a shitbonfire and driven by the winds of his monumental ignorance he turned into a raging shitfirestorm. If I get to be married to Barb I'll have total control of Sunnyvale and then I can unleash the shitnami tidal wave that will engulf Ricky and extinguish his shitflames forever. And with any luck he'll drown in the undershit of that wave. Shitwaves.
     
  2. {{909}}'s Avatar

    {{909}} said:

    Default Re: DIY Microserver alternative

    I got a system up and running earlier today and just dipped my toe into unraid.

    Typically of the 2 motherboards I scrounged from work, the gigabyte high quality one wouldn't boot from USB, while the Soyo branded one did, I dont think either will have the gusto to fullfil the requirements anyway, but its great to play with unraid and see just how inadequate the hardware is before I look at buying new.

    So far, so good.

    Thanks to all that have contributed so far
    [Only registered and activated users can see links. ]
     
  3. Teajunkie's Avatar

    Teajunkie said:

    Default Re: DIY Microserver alternative

    Although the unraid route looks a good one for me I just can’t move over yet
    I just don’t want to lose all my data when formatting the drives.

    If if anyone else has an idea of how to move?
    My decal venture has taken over my dog tag business
    nice to be busy though.
    Instagram and twitter @mrteajunke.
     
  4. Lou_smorals's Avatar

    Lou_smorals said:

    Default Re: DIY Microserver alternative

    Quote Originally Posted by Teajunkie View Post
    Although the unraid route looks a good one for me I just can’t move over yet
    I just don’t want to lose all my data when formatting the drives.

    If if anyone else has an idea of how to move?
    Hi
    I bought one big drive that I was upgrading at the time and moved one drive at a time. I had and still do a spare server, which you would be welcome to borrow if you lived more locally, however you would have to pay shipping both ways as you are a long way from Norfolk.
    LS
    Dear Lord, please grant me the ability to punch people in the face over Standard TCP/IP
     
  5. {{909}}'s Avatar

    {{909}} said:

    Default Re: DIY Microserver alternative

    threw 2 x 3tb red drives into the box to test it out and after watching a few noob youtube vids, set it to format them before I went to bed. That was 20 hours ago and the first of the two still ain't completed formatting. Is this normal? I read a few posts on forums saying it took 5 hours to format a 2tb, so obvioulsy its not a task to sip a cuppa over but 20 f'kin hours can't be right.
    [Only registered and activated users can see links. ]
     
  6. Rhinoz's Avatar

    Rhinoz said:

    Default Re: DIY Microserver alternative

    Quote Originally Posted by {{909}} View Post
    threw 2 x 3tb red drives into the box to test it out and after watching a few noob youtube vids, set it to format them before I went to bed. That was 20 hours ago and the first of the two still ain't completed formatting. Is this normal? I read a few posts on forums saying it took 5 hours to format a 2tb, so obvioulsy its not a task to sip a cuppa over but 20 f'kin hours can't be right.
    I thought windows long format does a read only check of the entire drive before doing a 'quick format', that check takes hours and is mostly pointless on a new drive, I take it these are not new drives?
     
  7. {{909}}'s Avatar

    {{909}} said:

    Default Re: DIY Microserver alternative

    brand new, just took em out the antistatic bag, straight into the unraid box. Would it have been better to format em in a windars box first?
    [Only registered and activated users can see links. ]
     
  8. Rhinoz's Avatar

    Rhinoz said:

    Default Re: DIY Microserver alternative

    When hard drives were smaller I would do a full format on new drives but as drives have got bigger and time takes longer I've not bothered and do a quick format instead, I could have just been lucky and not had any bad sectors so far.
     
  9. Over Carl's Avatar

    Over Carl said:

    Default Re: DIY Microserver alternative

    If it's just a test build that's one thing, but it's a good idea to test drives as thoroughly as possible before setting up a RAID.

    In theory RAID should allow us a little bit of redundancy. However this is going on the assumption we are dealing with a good set of drives.

    Could end up in total data loss if one drive fails, then at rebuild time another drive is found to be faulty. (Yes I have had brand new faulty drives more than once).

    Depending on the RAID type/controller, even a "working" sector that takes a few attempts to retry could make a drive drop offline (read into TLER).
     
  10. {{909}}'s Avatar

    {{909}} said:

    Default Re: DIY Microserver alternative

    I went to work and came back to see the system was still reporting that it hadn't finished formatting so I rebooted and they all reported formatted and working, so I guess it was a refresh issue.

    I tested it briefly with some 10gb 1080p files and apart from the occasional few seconds of buffering, it seemed to work pretty well. This could be down to the fact that my router isn't gigabit too, which I didn't realise until now.

    I'm guessing this will be adequate for the school really, so the plan now is to take this system back to work after populating it with a bunch of spare drives. The school doesn't need anything more than 500gig so I can probably just put a single 500gig in there for storage and a second one in as a parity drive, so if all goes well, it'll have cost em nothing and I wont mention the mobo, cpu and ram that i still have left over.

    So, next step is to grab some more power efficient hardware (and a new router most probably) and cobble a similar machine together for myself. Expect more questions...
    [Only registered and activated users can see links. ]
     
  11. Over Carl's Avatar

    Over Carl said:

    Default Re: DIY Microserver alternative

    It may be cheaper/more practical to keep the existing router, but install a gigabit switch.

    If you aren't bothered about buying brand new, used 24/48 port rack mount switches often appear for pennies on ebay. I remember I thought about putting some Dell 24 port gig switches (Powerconnect 5324?) that I used to have on eBay until I saw they were going for pennies so I just gave them away.