Box Updating ??

[Termy]

I have the Pace DiTV 2000 box which keeps going into update all the time. It has had the "No Update Mod" done to it.

All the channels work fine, but every five mins or so it goes into update.

Btw, the box is an N*L and I am in a T/W area, the net id and freq are set right and the s/w on the box is cr2.

Any idea's anyone.

Many thanx for any replies.

[shagx]

its the old problem where ntl 2000 boxes dont like working in a TW area, try flashing the atmels with TW software then it will be ok

[Termy]

Thanx for that m8,,, is this the only way as I don't have the equipment or the skill to do this sort of thing.

Many thanx though.

[shagx]

only way m8 sorry to say!!!!!!!!!!!!!!!!!!!!!!!!!!

[WideOn]

no take the mod wire off the box that is concexted to pin 11

then boot the box holding the power button

then to 4321

then i shud upgrade to telewest software and then sadly ya have no ppv

but it will work

[theone]

no take the mod wire off the box that is concexted to pin 11

then boot the box holding the power button

then to 4321

then i shud upgrade to telewest software and then sadly ya have no ppv

but it will work

this wont work m8 if ntl dumps will still update even on cr3.,....u need tw 2000 soft

[shagx]

this wont work m8 if ntl dumps will still update even on cr3.,....u need tw 2000 soft

I agree with that, my m8 had one im ina TW area and we tried everything, the only way was to reflash atmels with TW software as i said before

[speccy]

This is absoloutely correct.

[Termy]

Everything is now working fine and dandy. Had the atmels flashed.

Many thanx for everybodys help and advice, you know who you are.