Right , i finally decided to "get with the times" and treat me NTSC xbox to a Xecuter3 mod as i been using an old enigmah final mod and thought it would go like a breeze but unfortunately i hit problems
As a precaution i backed up my c+e to a safe place on me pc before i started.After stripping down the xbox i carefully removed the old enigmah mod and checked to see there was no solder spatters. I went for the pin header option and soldered it in . Next i carefully soldered the LAN , HD and d0 cables , so far so good.Next the bunch of black cables that goes to the external switch were carefukky threaded through and connected . The little addon board for the power/start buttons was next put into place and all associated wires connected to it .
Reassembled xbox and connected up the power , LAN cable and AV cables ( HD pack ) , powered up and sat back and waited for the fun to begin....
Switched on and i was met with a error screen and error code 16 ( which i think is something to do with dashboard issues ) .I get no activity on the l.e.d.'s on the external switch and i have no access to FTP or MS dash settings which is a right pain , worse still i cant get orig titles workin neither , just error 16 all the time .
So i really wanna know whats the best fix and way forward , any help really appreciated
Social Networking Bookmarks