Close

Results 1 to 9 of 9
  1. #1
    DF VIP Member Simate's Avatar
    Join Date
    Sep 2003
    Location
    .
    Posts
    6,866
    Thanks
    75
    Thanked:        47
    Karma Level
    920

    Default How do you get DH to run using 2.71SE''?

    I've tried and tried for about 3 hours and cannot get Devhook to work with 2.71SE''.
    DH runs but when I tell it to run an ISO it either turns off or goes back to the XMB. I select 2.71F as instructed but no go, my understanding is that selecting this DH uses the FW already flashed in the PSP so no FW files are needed, right or wrong?

    I've been using Dark Alex's DH files. All the tuts that I've found are a bit hit and miss. There's probably something very simple I'm missing, whatever it is it's not jumping out at me.

    Can someone help me please as I'd like to play Mortal Kombat Unchained which only works with DH, at the moment anyway.

    Thanks in advance.
    360 ID: Symate

  2. #2
    DF VIP Member bugnote's Avatar
    Join Date
    Jan 2001
    Location
    tut north
    Posts
    1,286
    Thanks
    64
    Thanked:        63
    Karma Level
    409

    Default Re: How do you get DH to run using 2.71SE''?

    did you dump each subsequent DH update with each release of custom firmware into the DH folder?

    i've attached my working DH folder and GAME folder, any probs it must be the firmware, I've just been whipped at this game by some bloke with a blindfold?!

    its working fine on devhook using flash firmware.

    Bug
    Last edited by bugnote; 8th March 2008 at 12:12 AM.

  3. #3
    DF VIP Member Simate's Avatar
    Join Date
    Sep 2003
    Location
    .
    Posts
    6,866
    Thanks
    75
    Thanked:        47
    Karma Level
    920

    Default Re: How do you get DH to run using 2.71SE''?

    Yes I did dump all the updates.
    Thanks for the attachment, still not working though, just goes back to the XMB, when it did I noticed the FW was 2.71A and not B'', turn off and on again and it's back to B'', should it do that?

    The settings in DH I'm using are (see below), and select 2.71 flash (which requires no fw in the folder right?). I tried Killzone which works from the XMB, it's just DH that's the problem.

    UMD SELECT: select your ISO
    UMD MOUNT: ISO ANYUMD (I don't seem to have an option for this)
    UMD VERSION: 2.xx to 2.00
    FIRMWARE: 2.71(Flash) (or 2.71, see notes above for details)
    CPU CLOCK: 222 Mhz
    BOOT SELECT: Reboot XMB
    PL-ADR: 89000000 (in: OTHER/preload address menu)

    Edit: I just watched a video of someone loading DH, I didn't realise you selected start, then it returns to the XMB, then you select the game from the XMB and it's then meant to load, I get 'The game could not be started (8002012D). I'll try some other ISO's, I'm not convinced but it's worth a go.
    Last edited by Simate; 20th November 2006 at 12:44 AM.
    360 ID: Symate

  4. #4
    DF VIP Member Simate's Avatar
    Join Date
    Sep 2003
    Location
    .
    Posts
    6,866
    Thanks
    75
    Thanked:        47
    Karma Level
    920

    Default Re: How do you get DH to run using 2.71SE''?

    Got it working at last. I rebuilt all the DH files from scratch again with fresh downloads, and walla
    I didn't realise you had to load the game from the XMB after loading DH and it returning to the XMB, I thought it actually loaded the game directly from DH, that's probably where I was going wrong earlier, if I hadn't watched the video I wouldn't have known.

    Not sure why your attachment didn't work but at least it's all up and running now. +K for your effort
    360 ID: Symate

  5. #5
    DF VIP Member Mall's Avatar
    Join Date
    May 2002
    Location
    UK
    Posts
    274
    Thanks
    0
    Thanked:        0
    Karma Level
    292

    Default Re: How do you get DH to run using 2.71SE''?

    UMD SELECT: select your ISO

    If you had selected your game there it would have loaded straight away.

  6. #6
    DF MaSter rborhara's Avatar
    Join Date
    Jul 2003
    Location
    UK
    Posts
    88
    Thanks
    0
    Thanked:        0
    Karma Level
    0

    Default Re: How do you get DH to run using 2.71SE''?

    guys ive updated my PSP from firmware 2.01 to 2.71- then down to version 1.50.
    i had a few ISO's but none of them work. So i installed devhook 0.46.
    But i dont really know how to use it or mount any iso's.
    can someone help

  7. #7
    DF VIP Member Simate's Avatar
    Join Date
    Sep 2003
    Location
    .
    Posts
    6,866
    Thanks
    75
    Thanked:        47
    Karma Level
    920

    Default Re: How do you get DH to run using 2.71SE''?

    Quote Originally Posted by Mall View Post
    UMD SELECT: select your ISO

    If you had selected your game there it would have loaded straight away.
    Doesn't do that in 2.71SE''

    http://www.youtube.com/watch?v=I6ZE4lQhh30
    360 ID: Symate

  8. #8
    DF VIP Member Simate's Avatar
    Join Date
    Sep 2003
    Location
    .
    Posts
    6,866
    Thanks
    75
    Thanked:        47
    Karma Level
    920

    Default Re: How do you get DH to run using 2.71SE''?

    Quote Originally Posted by rborhara View Post
    guys ive updated my PSP from firmware 2.01 to 2.71- then down to version 1.50.
    i had a few ISO's but none of them work. So i installed devhook 0.46.
    But i dont really know how to use it or mount any iso's.
    can someone help
    Here's a user guide.
    360 ID: Symate

  9. #9
    DF MaSter rborhara's Avatar
    Join Date
    Jul 2003
    Location
    UK
    Posts
    88
    Thanks
    0
    Thanked:        0
    Karma Level
    0

    Default Re: How do you get DH to run using 2.71SE''?

    cheers guys, i was doing the right things - but realised you need a umd game in the drive to make it work.

Social Networking Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •