Samsung D900 Debranding

[Freaky]

rite guys hope one of you guru,s can help

on a fuckin mental impulse buy ive just won a D900 on ebay BNIB for £167, now ive seen the unlockin clips on ebay for a tenner, but i also wanted it debranding, its on T-Mobile, i saw this on ebay

and what i wanted to know really is, what software is it i need to unlock and debrand it, as it says it dont come with any.

so guys if anyone can help id really really appreciate it

cheers

http://cgi.ebay.co.uk/Samsung-D800-D...QQcmdZViewItem

[ACE_UK]

The easiest and safest way would be to let someone with nspro do it , it could be a right headache doing it yourself

[Freaky]

shit i thought i could just get the software and do it myself, im gutted now lol

thanks for the reply m8

[procode]

This same person seems to be offering an even cheaper option too - which is strange - if either will work .. ??

Procode ..

http://cgi.ebay.co.uk/ws/eBayISAPI.d...ype=osi_widget

[Termy]

This same person seems to be offering an even cheaper option too - which is strange - if either will work .. ??

Procode ..

http://cgi.ebay.co.uk/ws/eBayISAPI.d...ype=osi_widget

Hi m8, yeah it will be a cheaper solution now as the original post was made approx 6 months ago. There will be free solutions available now, well probably.

[mattress]

any more info/advice on this?

[hyDr0]

piece of pish! ... download the d900 flashing soft called onenanddownloader 1.8 and firmware here .. top left select d900 not d900i

set com port 1, speed 921600 , load your .cla file by clicking Bin... Click start , then when ready click download. .. wait some time .. job done oh and before you do flash the handset make sure the battery is fully charged.



hydr0

[mattress]

hydro, you're a diamond. if i get stuck, i'll give you a shout, if that's ok?

[hyDr0]

no probs m8 you should be ok aslong as the battery is full

[Argyll]

piece of pish! ... download the d900 flashing soft called onenanddownloader 1.8 and firmware here .. top left select d900 not d900i

set com port 1, speed 921600 , load your .cla file by clicking Bin... Click start , then when ready click download. .. wait some time .. job done oh and before you do flash the handset make sure the battery is fully charged.



hydr0

This is probably a dumb question but do I have to use the special flash cable thingy or do I use the normal pc to phone cable supplied with the phone?

I'm trying to unlock my o2 D900 phone. Strange because most o2 phones aren't locked!

I should have said that when I click bin a file explorer screen pop's up! Which folder do I select?

[Termy]

This is probably a dumb question but do I have to use the special flash cable thingy or do I use the normal pc to phone cable supplied with the phone?

I'm trying to unlock my o2 D900 phone. Strange because most o2 phones aren't locked!

I should have said that when I click bin a file explorer screen pop's up! Which folder do I select?

You should be able to use the cable that came with the handset.

This is a myth, not ALL o2 handsets are unlocked m8. Especially the PAYG ones, none of them will be unlocked.

You need to select the folder in which you downloaded the bin (flash) file into.

[Argyll]

Sorry but I don't understand! What bin file? The file from the program oneanddownloader or is it a file on my actual phone itself.

Do you know what the file is called because I could search for it.

[Termy]

Sorry but I don't understand! What bin file? The file from the program oneanddownloader or is it a file on my actual phone itself.

Do you know what the file is called because I could search for it.

You need to download the bin file, which is the flash file/firmware from the link in the above post. Then you have to use the USB cable to write this to the handset.

But as I say, you NEED the bin file first to write to the handset.

[Argyll]

I think I know what the problem is! I only downloaded oneanddownloader and not the firmware..doh! That'll teach me to read it properly next time.

Right which firmware do I use?

Forget that Sussed it I think

[Argyll]

How long does it take after I press start? I pressed it five mins ago and all I'm getting is this screen!

And yes the phone is powered on

[Termy]

Have you installed the USB drivers correctly ?

Are you sure the cable is using COM 1 ?

Also, make sure there is a full charge in the battery as I think flashing can take upto 45 minutes.

[Argyll]

How do I find out which port I'm using?

[Termy]

How do I find out which port I'm using?

Check in device manager under "Ports (COM & LPT)"

[Argyll]

Dunno mate what should it be showing as. I've attached a screenshot of my device manager

[Termy]

Dunno mate what should it be showing as. I've attached a screenshot of my device manager

The cable isnt listed in the device manager m8, so at a guess you havent installed the drivers correctly.