Can I update my Tomtom One V2 with these maps?
Can I update my Tomtom One V2 with these maps?
©lubber Lang
CHAMP19NS
Cheers DJO...will give this a go tonight!
"Where you are is what you eat. When I'm in London I'll have beans on toast for lunch. On holiday � what? Tapas? Go on then I'll have a bit. You eat whatevers in that area"
Karl Pilkington
Thanks DJ, can you post more info please?
©lubber Lang
CHAMP19NS
@ Clubber Lang
See here: http://www.digital-forums.com/showthread.php?t=359254
@ All
Confirm that my image works fine, all camera warnings working and postcodes.
Does NOT work at the moment on the AytoBe :-( Gives "Not enough memory" error...
You WILL need to re run the hack/keygen after copying my image to your SD card, as the software creates a new ttnavigator.bif in a new device.
I'll post a fully workable guide later on.
DJ OD
Method 01.
This is for those who have downloaded my SD card image, and found it doesn't work (lol). Basically giving the "Activation failed" error.
You'll need this: http://www.sendspace.com/file/cft8q1 (someone pliz U/L to Blaggards FTP)
Extract the files to the following folder: C:\TTN7\
Open the file ttnavigator.bif from the root of the SD card of your unit.
Note the Deveice ID (ten digits)
Right click on the "Edit, Save, Open.bat" file from C:\TTN7\ folder and choose edit.
Replace the ########## with the ten digit Device ID.
Save and close the file.
Then double click on the same bat file.
A United_Kingdom_and_Republic_of_Ireland-14.dct file will appear in the C:\TTN7\ folder, just copy this file to the United_Kingdom_and_Republic_of_Ireland-14 folder on the SD card
Put it back in the device and reboot.
Should work fine ;-)
DJ OD
ive upped the TT7_Navigo.rar to blaggards ftp.
Method 02.
This is for those wanting to do the whole process themselves, or if you want to use another map. It's also useful for those trying to add v8 maps to a dedicated unit (Clubber Lang ;-)). And also anyone trying to install on another device. Like I say AyToBe not working yet ;-(
Keygen and patches: http://www.sendspace.com/file/cygc4z
Tutorial attached to post.
Someone please upload tutorial and keygen to Blaggards FTP as the sendspace links expire.
Cheers all, and enjoy.
DJ OD
made a folder on the ftp called 'tomtom7 for navigo'
all the files from here are in there.
How do you get to tomtom information page? The one in the picture earlier, I been there before but can't remember how, tried all kind of options.
press the signal, then the version.
Thanks, spent a fair bit time going through all the menus, lol
Anyone managed to use their favorites from TT 6 on TT 7??
Hi
Copying the mapsettings.cfg worked for me all recent destinations favorites etc work on V7.
Another bonus with V7 is you can use custom icons instead of the blue arrow there are numerous cars, bikes etc that can be used. (THESE ONLY WORK IN 3D mode......)
GOt TT7 working ok on Navigo SY895 wide screen.
Instuctions below
How to install TT7 in ten minutes or less
1) Unzip/Unrar to PC.
2) copy "mobilenavigator" and "maps" folders to root directory of your SD card for your Navigo SY895 widescreen.
Insert storage card into Navigo.
3) If you want to boot up in Win CE, insert stylus into reset hole and hold down "on" switch until you see
Win CE logo.To go back to the FYloader screen,reset but dont hold down "on" switch.
4) If using FY loader make sure you rename existing Turbodog if keeping.Make sure you keep TT as
"mobile navigator" folder and rename "United_Kingdom_and_Republic_of_Ireland_v720.1802" folder to "maps".
5) Run "TT exe" the first time and you will get activation error. If you then look at root directory of the SD card
you will see a new file called "ttnavigator.bif".
6) copy bif file on storage card to PC and open with notepad.there will be a line saying DeviceuniqueID=XXXXXXXXXX.
This is the ID number.Make a note. It could be with or without a . halfway EG xxxxx.xxxxx or xxxxxxxxxx
7) Copy the "TTN7" folder which can be found in the "CRACK" folder to the root of drive C: It must go to root drive !!
8) In the "TTN7" folder right click on "Edit, Save, Open.bat" file and click Edit.You should now see
C:\TTN7\tt7_keygen.exe "C:\TTN7" "XXXXX.XXXXX". Where it has "XXXXX-XXXXX" enter your DEVICE ID from the
"ttnavigator.bif" file. its pot luck for the . or not, try both if not working.
9) make sure you enter a new line under C:\TTN7\tt7_keygen.exe "C:\TTN7" "XXXXX.XXXXX".and Type the word pause
type that exactly.Save edited file and close.
10) double click, edit,save,open.bat, and you now should see a new dct file,
Called "United_Kingdom_and_Republic_of_Ireland-14.meta.dct"
11) Copy this file to the "United_Kingdom_and_Republic_of_Ireland_v720.1802" or maps folder which can be
found on the storage card.
12) Put Sd card into Navigo and boot up. Change GPS device to other NMEA gps reciever. set buad rate to 4800.com1
JOb done!!!!!!
Ive upped a few cars you can use instead of the boring blue arrow, so it will look something like this (nice old Fiat 500)
This is for Tomtom 7 and goes in the route of the memory card
http://www.megaupload.com/?d=G3ORQX48
Last edited by bub; 18th August 2008 at 07:31 AM.
Hi guys
Can someone help me out with this. Following DJOD's guide (thanks) I got everything installed onto the sd card started up the navigo and all works smoothly regarding the activation HOWEVER I cannot get a gps signal at all.
Spent hours letting it try to detect but nothing not even a faint signal. The little round yellow and blue icon in the GPS status screen doesn't rotate so it appears it's not even searching.
Should I have left any files in the SD card from the original navigo files? I removed them all and clean installed the tomtom files as per the DJOD guide.
Thanks
MML
IIRC go into the settings, then gps status and click configure. Choose other wired nmea (?) gps adapter and set baud to 1200 (think any setting here will be fine TBH) and then choose com1.
The error then should go and change to waiting for signal.
DJ OD
Social Networking Bookmarks