Mileage Correction on opel Astra 2004

[batman2]

HI
which is the method for Mileage Correction on opel Astra 2004, diagnosis-plug programming or the eeprom by clip
i am using DIGA-Consult programmer Thanx

[us]

• Remove the cluster and open it
• Look for the eeprom 35080.
• Desolder this eeprom.
• Connect the clip with port M 35080.
• Put the clip on eeprom 35080 (red to pin 1).
• Select the menu Opel
Astra
2003 VDO
clip
• The Diga-Consult shows you the old value
• Select the menu SAVE
• Press Stop twice
• Select the menu Opel
Astra
2003 VDO
350800 ->0
• Diga start to erase the eeprom, wait until it show you Ok
• Select the menu Opel
Astra
2003 VDO
clip
• Diga will show you 000000 km. Scroll down and select the menu Load.
• Load the data that you have save previously. This is the first file in diga screen
• Now scroll down and select the menu write all
• If the Diga says Data not qual, it is normal. Just press OK
Press OK only once. Some people thinking that they are not press the button correctly or the Diga
hang. It is normal that the diga take some time to jump in main menu, Just wait until the Diga display
the menu.
• Select the menu adjust km.
• Enter the new value and press ok