callipers zx9r front ?

[briansite]

I have got a ZX9R f2p1 on a 53 plate and want to change the brakes cause they are not the best.
Now I already have changed the master cylinder to a ZX10 one and put new braided hoses on , the only thing left is to change are the 4 pot callipers on the front.
Instead of using kawasaki parts or paying out a lot for Brembo does anyone know what others will fit from different bikes ?
I have heard some Suzuki gsxr will ?

Your advise would be gratefully received

[Pegasus]

Any caliper will fit if you are prepared to machine a bracket up, but why not do the job properly and just go for Billet 6's along with the appropiate master cyclinder?

PS
If you do go for 6 piston calipers, that ZX10 master cyclinder you have will need replacing for something that can push more fluid.

[tiggerbiker]

what exactly is the problem?

i struggle believe that a caliper would be at fault here.

[briansite]

what exactly is the problem?

i struggle believe that a calliper would be at fault here.

zx9rs tend to have a inherent brake problem with them getting weak as time goes on i.e. not as sharp and hard as the next generation of kwaks.
Even with changing the fluid and removing all bubbles the brake lever still come back to far even on highest setting.
The master cylinder normally is the problem but reading up about them on the forums a calliper kit would help as they need a bit of servicing having been through winter salts etc.
I couldn't be arsed with taking the lot apart so just looking at other alternatives.

[yorkie]

I've not heard of the F's having brake problems, they probably just need a good strip, clean and Bleeding.

[briansite]

I've not heard of the F's having brake problems, they probably just need a good strip, clean and Bleeding.

All done now m8 sharp as f**k now