Latest easyusetools keygen & latest meta files - 01-03-09

[Russ]

1.) You need a patched version of Tomtom software - it will not work with the genuine software. If you are using a software version earlier than v8.010 it can be patched using the "RunMeforAllAutomatic".

2.) Copy new map folder to Tomtom (can also copy file named ' MapSettings.CFG' from old map folder to new map folder, this will keep your Home & Favourites locations).

3.) Make a note of your DeviceID - this is a 10 digit code eg. ABC12DEF34 . Open the document named DeviceID using notepad in the keygen folder and enter YOUR DeviceID code (NO SPACE) then save.

4.) Leave Tomtom connected to PC & on PC click on "RunMeforAllAutomatic" in the keygen folder.

5.) You will see this :-

Enter 1,2 or 3 for your Choice, Standard is 1

1. Run it for Navcore 8.010 and higher
2. Run it for Navcore 7 up to 8.002
3. Run it for Map 6

1-3 :

So Enter 1 after 1-3 :

6.) You will then see a list of all Available Drives - Enter the drive letter (eg - E ) of your Tomtom - do not add : or \

7.) Should now see this if successful (Map name will be different if using a different map):-


### Run Fake meta.txt Check ###

United_Kingdom_and_Republic_of_Ireland-15.meta v810 bld1870 Key seems to be OK

# Can not read ID from ttgo.bif #
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~

### Run Keygen ###

h:\United_Kingdom_and_Republic_of_Ireland\United_Kingdom_and_Republic_of_Irelan
d-15.meta.dct exist already


h:\United_Kingdom_and_Republic_of_Ireland\United_Kingdom_and_Republic_of_Irelan
d-15.meta.dct exist



Used DeviceID = ABC12DEF34


Press any key to continue . . .

8.) Pressing any key will then close the "RunMeforAllAutomatic" - Remove Tomtom from PC - Tomtom will start up - first start up could take a few minutes.


Here's a copy of TTusers latest easyusetools keygen & latest meta files - dated 01-03-09 (& a copy of the guide I wrote included)

http://www.megaupload.com/?d=2I0GL5S2

[maltloaf]

link updated 01/03/09