How to build your own SLIC 2.1 Bios

Thread: How to build your own SLIC 2.1 Bios

  1. matieboy's Avatar

    matieboy said:

    Default Re: How to build your own SLIC 2.1 Bios

    i knew DF would come to the recue,
    i managed find a modded bios for my lappy,(compaq presario c700 series)
    but not for my mates acer aspire 5535,
    so hopefully i can do this for him, going to have a go on my desktop pc first,
    thanks again

    Matieboy
    Very funny, Scotty. Now beam down my clothes
     
  2. matieboy's Avatar

    matieboy said:

    Default Re: How to build your own SLIC 2.1 Bios

    Quote Originally Posted by matieboy View Post
    i knew DF would come to the recue,
    i managed find a modded bios for my lappy,(compaq presario c700 series)
    but not for my mates acer aspire 5535,
    so hopefully i can do this for him, going to have a go on my desktop pc first,
    thanks again

    Matieboy
    Hmm, well cant do that, turns out its a pheonix bios,
    anyone know of another program to do them,
    wouldnt mind learning more about this bios editing if anyone has any links for tutorials, read a bit about calculating offsets, but that lost me, i need to start from the beginning.
    cheers
    Very funny, Scotty. Now beam down my clothes
     
  3. DejaVu's Avatar

    DejaVu said:

    Default Re: How to build your own SLIC 2.1 Bios

    Phoenix Bios's can be done. I've done an Acer with no problem...

    I'll investigate for ya,

    [SHOWTOGROUPS="80"]Found this -
    The Request -
    -Motherboard Manufacturer and Model: Acer Aspire 5535
    -Bios Revision: 1.04
    -Bios Type: Phoenix
    -Bios SLIC : 2.0 at this time, I want to have 2.1 Dell
    -Bios Link: see attached file

    Hi folks
    Sorry for snooping in, but Dear Busykid, since the specs 5535 & 5536 are almost same, so is it possible for him to use this Modded BIOS of Acer 5536 instead (which you modded for me)? If yes, then can you please enlighten us about more such models which may use same BIOS so that more people may benefit from your creation?

    Acer 5535 Bios link : [Only registered and activated users can see links. ]
    AND
    Acer 5536 Bios link : [Only registered and activated users can see links. ]
    Thanks in advance.
    The Reply...
    I modified the bios for the second time...try this one
    -Manufacturer: ACER
    -Motherboard Model: Aspire 5536
    -Bios revision: 1.04
    -Bios Type: Phoenix BIOS
    -Primary Bios Download Link: [Only registered and activated users can see links. ] 5536&OS=V10&LC=en&SC=EMEA_27
    -Source of Bios Download Link: [Only registered and activated users can see links. ]
    -Winflash and PHLASH16 Bios Update Tool Included - If Possible, I strongly recommend you to use PHLASH16 located in DOS FOLDER - Flash Bios in DOS using PHLASH16 and Bootable USB Flash Drive - Rename JV50_104_SLIC.WPH to JV50_104.WPH and At command prompt, type: phlash16 JV50_104.WPH /x /s /c /mode=3
    -SLIC: DELL_QA09.BIN 2.1
    -SLP: DELL
    -DELL Certificate Included
    -TOOL: Phoenix Mod Tool v0.016
    -Modifier: Busykid508
    -Please provide feedback

    CRISDISK Is Included for Bios Recovery
    PHLASH16 DOS Bios Update Tool Included

    ACER_Aspire_5536-ACER-1.04-DELL_SLIC21_DELL_SLP
    [Only registered and activated users can see links. ]
    The 5535 & 5536 discussion -
    The BIOS are different but the hardware is same.
    So can your modded Bios for 5536 be used on 5535...??

    Yes, that would be fine.
    Fella didnt come back moaning, so I guess it worked. I would ask Busykid again just to make sure if I was you.
    BUT - You will be doing this at your (or your mates) own risk.

    [Only registered and activated users can see links. ][/SHOWTOGROUPS]
    Last edited by DejaVu; 3rd October 2010 at 01:10 AM.

     
  4. matieboy's Avatar

    matieboy said:

    Default Re: How to build your own SLIC 2.1 Bios

    just tried to download that buddy, but it says the file has been removed,
    thanks anyway,
    will keep browsing
    Very funny, Scotty. Now beam down my clothes
     
  5. matieboy's Avatar

    matieboy said:

    Default Re: How to build your own SLIC 2.1 Bios

    well i have finally managed to create my own slic bios for my foxconn 945g7ma-8ks2h,
    the bios was a pheonix award bios, the modding was easy, the flashing was the issue,
    my awdflash exe was being a pain, as odd as it may seem, i ended up using a awdflash for asus exe, anyway this is the tool i used, just the same as AMI slic app
    [Only registered and activated users can see links. ]
    Very funny, Scotty. Now beam down my clothes
     
  6. Mobileman's Avatar

    Mobileman said:

    Default Re: How to build your own SLIC 2.1 Bios

    got old mates machine and vista was fooked so have stuck win 7 pro on, but the bios is only 2.0 now tried few update programs but all were malwared

    so need to find a award bios update tool to see if there is a 2.1 update and then i can slic bios as above

    any ideas on where to find a program that will


    EDIT idiot head on i will check manufacturers site first as its a compaq DOH !