what tools do i need for this and is their a decent place online to purchase it?
tia
what tools do i need for this and is their a decent place online to purchase it?
tia
There are a few tools out there that will do the job for you.You can pick up a clone digi tool for around £200-£300 which should be able to do this or there other tools which are quality but there into the thousands..Digimaster..Enigma etc.Best advice if its only the one car get someone with the equipment to do it for you as its not as simple as most people think.Many cars require removal of instrument cluster needles etc and soldering to some very small componets on the board which can easily cause damage to the board or components.Trust me been there done it and had to fork out a fortune to replace customers instrument clusters.Lol..Im sure if you post on here for someone in your area that can do this you will get a reply from someone quite quickly with a decent price..
hi m8
if u only got 1 car to do
have u got a eeprom programmer that supports 93c56 chips???
if so please read it
post dump and i will correct it with new mileage 4 u
saves u spending too much money
a willem programmer will read it
take the clocks out and i think if u remove the rear cover u should see the smd chip with 93c56 on it on the board
if ur handy with a soldering iron then u can remove and read it
or if ur programmer support incircuit programming then just clip with soic smd clip and programme
2001 Accord is 8 pin dil chip not smd
Rob
Social Networking Bookmarks