Cheers.
Cheers.
That Mystical_2K was an awsome write up. LOL i cant belive you and a m8 did it whilst you were totaly Leathered.LOL you sound well funny.
lol
ps. you couldnt mod my xbox could ya m8
Not quite sure what the hell im talking about..Just nod and i mite shut up......
If you run Evo-X on your box you can see how much drive space you have under System Utils -> Harddisk (I think)Originally posted by slain
What are the capacities of the E:\ and F:\ partitions, and are they empty by default? I need to know so I can stick various games/DivX movies on it.
This is also a realtime display so if you are FTPing to your XBOX it will show how much space is left and will decrease as files get FTPd This is quite a nice feature methinks.
DF Moderator
XBox One | Panasonic 4k | MS Surface Pro 3 | 3DSXL | WiiU | RPi3
XBL : TheSumOfAllEvil
O.K guys ive just put all the files on my x-box h/d without the p-c and it works o.k. I,m useing a iso called GoldgergModsNoPCEVOX.rar , i,ve got the extender chip in btw. i can not copy any games on to the drive as the instructions say, it states go the the dvd and copy all files but i,m only getting one called default.xbe any ideas, and if i go into the games dir straight from games & apps it does not show me anything . It states just copy all files reboot , pick the games dir and the game you have copied and press A to boot. Sorry guys but i,m only just starting with this software and its all new to me.
Help Appreciated
Cheers
Sorry Guys forget all that i,ve done it
Is it easy to replace the drive like up to a 120 gig , i know the hardware side but its the software side, is there a easy to follow guide ???
Cheers
Falcon
i know you have to zero the drive which if you know how i beleive is easy enough, but there is a tool that does it for you, have you read the sticky at the top of the board m8, i havent done it myself so cant help, but i know a few people have used the hard drive prepare tool
Through the darkness of futures past. The magician longs to see.
One chance out between two worlds. Fire Walk With Me.
I,ll have a read and play cheers
i found this on some site aswell m8, maybe it might help aswell
First, you will need to backup the files on the HDD currently in your Xbox. To do this, set the appropriate network settings, and simply transfer the C (system files) and E (music and saved games) partitions someone onto your PC HDD.
Now, you will need to hook up the HDD you are planning to put in your Xbox to your PC.
Boot up your PC.
Run Ziki's HDD Preparer 1.3. Note that this program has only been tested to work on 2K/XP/98se and it does not work on NT. Select the appropriate drive. Tick "Zeroing" and "Only 1st 4096 sectors of partitions". Click Prepare. It should finish finish in under a second, depending on how big your drive is.
[1]
Shut down your PC.
Take out the HDD.
Set the jumper to cable select if it's there (IBM). If not, try master (Western Digital).
Now, open your Xbox up. Use a hair dryer on all the pads and then use it on the sticker with the barcode and the then the one with the warranty. There are 6 large screws. Use a Torx 20 to unscrew them.
Now that you have unscrewed the case just give it a tug and it should come off.
Now you should see the IDE cable in the HDD and Xbox DVD-ROM and also the power cable for the HDD. Now, take both the IDE and power cable off from the HDD.
On the right side of the Xbox, you will see that there are clips holding the cord of the power cable down. Untangle these.
Now, mount your new HDD on top of the Xbox HDD and plug the power cord and IDE cable into it.
Turn on your Xbox and boot off the Evolution X CD.
Set the appropriate network settings.
Reboot your Xbox.
Now go to hard disk.
Go back to your PC and connect via FTP.
You will need to format all the partitions via raw commands. To send a raw command in FlashFXP, hti Ctrl + R. Copy and paste the following:
Formatpath \Device\Harddisk0\Partition1
In the status window, you should receive a FormatKey. Highlight it to copy it and then type:
Formatdrive key
You will need to do this for every partition. Simply replace the "1" with "2" at the end of the Formatpath command and repeat all the way up to 6. When you are done, your F drive should have blown up.
[1] [2] [3] [4]
Now, re-upload the C and E partitions to your Xbox.
NOTE: If any of the previous steps did not work, make sure you plugged everything in correctly and try all different jumper combinations that are pictured on your drive. If you still can't get it working, start over and try again. If they do not work again, you might have zero the entire drive. This will take approximately the same amount of time it would to format the drive so you may have to leave it overnight.
Through the darkness of futures past. The magician longs to see.
One chance out between two worlds. Fire Walk With Me.
is the original xbox system link a crossover cable?
i dont think it is
Can somebody tell me the steps to setting up my xbox to pc? I'm running windows xp. I set up a local area connection and connected the xbox via a crossover cable. Then tried using flashfxp and all I get is connection refused or timed out. Not sure if I set it up correctly. I can find tut's for using a hub, but not a crossover. Any help would be appreciated.
i have beeen a vip member 4 about 6 months but didnt realise the x- b0x had been done --------------are there any irregularities
"no problems, just solutions"
"An essential aspect of creativity is not being afraid to fail"
Just want to know if xbox is capable of cdr out of the box that's
all simple neat sweet and complete. Thank's
Social Networking Bookmarks