Hi all
I've just bought a P reg Peugeot 106 1.5 D with the standard radio fitted. Its asking for the code though. Is there any way to get around this or is it new radio time.
Thanks in advance
nickstan
Hi all
I've just bought a P reg Peugeot 106 1.5 D with the standard radio fitted. Its asking for the code though. Is there any way to get around this or is it new radio time.
Thanks in advance
nickstan
remove bottom lid right hand side series of solder links marked c1 - c10
remove all except c1 code = 1112
Mike
Last edited by MIKE M; 2nd August 2002 at 11:27 PM.
Mike
Im not bitter, Im a red
Cheers m8
Hi there,
My friend has a N-Reg Peugeot 106 Aztec...
The Radio is a Peugeot Clarion 1010 will this method work for that too? She had some welding done and they removed the battery! No radio for 6 months now!
Plasma
Yes the above will work ok
Magic, atleast I won't be killed by her singing next time she gives me a lift somewhere!!
Cheers!
Plasma
Mike M do you know how to find the 4 digit code on Ford radios as well?
Im off to a place of worship and wont be back till closing time
the code is in a 77005 chip 93c46 but it is crypted and you need the right software/hardware to read it
Ok ... I'm about to ask a dumb question, flame me if ya like....
Pueg 106, with a Peug 1010 stereo....
Can't get it out of the dash!!!!!
Was expecting, slots (like the Sony's) or the 4 grub screws with the U shaped pegs ... no holes, no solts!
I'm not a monkey but any advice would be greatly received!
Plasma
2 spring loaded clips either side of radio gently pull the radio forward (fingers in tape deck) look down the side of the radio you will see the clips flat piece of metal pull the clip 2ward you while gently pulliing thr radio from the tape deck
Mike
Mike
Im not bitter, Im a red
Cheers Mike will give that a go!
I saw the clips, but couldn't get it out!
Didn't want to pull the front off the radio!
Plasma
sorry to contradict you Mike M but you have to push the 2 locks away from you towards the back of the radio to unlock the clip then pull the radio out
@samson
No probs m8 , havnt taken one out for a while,
Mike
Im not bitter, Im a red
right guys,
just had time to get my 106 radio out, its had random numbers stook on the screen for ages, and even holding band wont clear it.
ive opened the top lid and cant seem to find the c1 - c10 points,
model is PU-9536A
how do i clear the numbers off screen, cos i think i tried to enter the codes too many times?
thanks
if you open the top lid with the face of the radio facing you c1 c10 are at the front right corner if you have had it off the power supply for more than 24 hours the screen will have cleared its self
try shorting all the pins on the micro with tin foil but make sure its not got any power to it and it will save you waiting, I believe capacitor C10 holds the voltage to keep display numer on screen
cheers guys, i got inpatient so wacked a sony cd player in there instead!
Social Networking Bookmarks