This tutorial can be used to jailbreak before applying the BlackSn0w unlock
Step One
Create a folder on your desktop called Pwnage
Download RedSn0w from
here and place it in the Pwnage folder.
Likewise, download the latest 3.1.2 firmware from below and
place it in the same folder.
Extract the RedSn0w executable from the zip file to the Pwnage folder.
Step Two
Connect your iPhone to the computer and launch iTunes.
Select your iPhone from the list of devices on the left. Now hold down
shift and click the
Restore button. Restore is preferred
as it won't create any wasted space on your iPhone.
Navigate to the Pwnage folder on your desktop and select the firmware ipsw.
Click the
Open button to continue.
Step Three
Once iTunes has finished updating your iPhone to the desired
firmware you may launch
redsnw0w.exe from the
Pwnage folder on your desktop.
Step Four
Once RedSn0w opens click the
Browse button
Step Five
Select the firmware ipsw we placed in the Pwnage folder on our desktop then click
Open
Step Six
RedSn0w will ask you if this is a newer (fixed) model iPhone.
Newer models of the iPhone 3GS have a fixed bootrom which
requires you to connect your device to the computer
each time you wish to reboot.
To find your serial number you can follow these instructions.
The week number is usually the 4th and 5th digit of the serial
number. For example, a serial number beginning with 88926
would be week 26 of 2009. 3GS units made week 45 or later will
usually have a fixed bootroom. Before week 40 they usually have
the older bootroom. Between weeks 40 and 45 the results vary.
If you believe your device has a fixed bootrom then press the Yes button.
Otherwise press the No button.
If you accidentally select the wrong option you may have to do
a full restore so please make this choice carefully.
Once the firmware has been verified click the
Next button to continue.
Step Seven
Make sure
Cydia is selected and click the
Next button.
From this window you can select the jailbreak options you
would like. If you have already pwned your device check
the
Already pwned option.
Verbose boot displays detailed information on boot of your device
and is generally only needed by developers and advanced users.
Make sure Cydia is selected. For this tutorial we will also select
Custom boot logo and Custom recovery logo.
When you click to select each custom logo option a dialog window
will appear asking you to select the image. Locate the image
you would like to use then press the
Open button.
*Remember the rules for boot logos are: RGB or Grayscale format
with Alpha channel and dimension below 320x480.
Click the
Next button to continue
Step Eight
RedSn0w will now instruct you on how to put your iPhone into
recovery mode. Disconnect you iPhone 3GS from the computer
then power it off. Then hold down the
Home button while reconnecting
the device to the computer. Don't let go of the button until RedSn0w
detects the iPhone and begins installation.
Step Nine
Your iPhone will now reboot
Step Ten
RedSn0w will then begin uploading the new RAM Disk and kernel.
Step Eleven
Once this is complete you will be notified that RedSn0w is done.
Click the
Finish button. When your iPhone finishes rebooting
(5 minutes or so) it will be jailbroken with Cydia on the SpringBoard.
*As usual a big thanks to the iPhone Dev-Team for this contribution to the community.
Social Networking Bookmarks