Magic CAM Flash reset

Thread: Magic CAM Flash reset

  1. Jusuf's Avatar

    Jusuf said:

    Default Magic CAM Flash reset

    Please know anybody which transponder (digital chanel) on Europe orbit can erase flash in CAM (PentaCrypt 1.07).

    Thank's for help

    Jusuf
     
  2. muja's Avatar

    muja said:

    Default

    I think(not sure)you need Magic Loader and Magic programmer mate,throw the aer is not posible,somebody corect me if i´m wrong.
     
  3. alex123's Avatar

    alex123 said:

    Default

    no muja you are correct ,josef why do you want to erase pentcrypt are you having problems with it ,I understood it to be the best software and the latest release
     
  4. Jusuf's Avatar

    Jusuf said:

    Default

    I have all to reprogramming Magic CAM-this is not problem, but know not which television chanel (boucket) on motorised system has my CAM self reprogrammed (maybe erased).
    CAM is not damaged, only Pentacrypt is out.
    I can do to check all received channels and compare to right encryption (Irdeto, Seca... on Astra). But this is a lot of work.

    All what i mean to say is, which boucket (Skandinavian packet or similar on which satellite) can on receiving self reprogramm my CAM.

    Thank's
    Jusuf
    Last edited by Jusuf; 18th September 2002 at 10:22 AM.
     
  5. alex123's Avatar

    alex123 said:

    Default

    Hi Josef I don't quite follow your question ,all you need is pentacrypt and a funcard that will clear viasat no problem,there is a very good file for fun and magic cam on boris site.hope this helps
     
  6. Jusuf's Avatar

    Jusuf said:

    Default

    Thank's for help.
    I think, that trough Via*** channel (Satisfaction or similar) is possible to upgrade the CAM modul.
    Magic Cam is not "write protectet". Receiving on this channels can self erase Pentacrypt.
    Is this possible ?

    Jusuf
     
  7. alex123's Avatar

    alex123 said:

    Default

    the satisfaction channel is on via 2 no hack for that as yet ,you should get xzone and ticket 7 & 8 for adult 24 hrs,never heard of a magic cam being erased by ota upgrades
     
  8. SimplyDigi's Avatar

    SimplyDigi said:

    Default Magic CAM reset

    I may be getting the wrong jist of this thread but are you sure you haven't just unplugged the CAM without a card in it three times, this will reset the CAM back to DREAM LOAD (check the CI settings on your receiver). If it has simply unplug the CAM and plug it back in with no card inserted, this will revert back to the latest PENTA software installed.

    Steven
     
  9. alex123's Avatar

    alex123 said:

    Default

    Hi Steven I am not exactly sure what he means but I think he saying that the satifaction channel has wiped his magic cam ,I have never heard of this but is this not the same channel for activating a via red cam ?