Contrary to popular belief, one solid state drive isn't the same as another solid state drive necessarily. OCZ's new Agility 2 is proof of that, boasting the final (v3.0.5) version of SandForce's SF-1200 firmware. The issue here is that Corsair's recently released Force series of SSDs are shipping (and continue to ship) with v3.0.1 installed, which -- according to SandForce -- will never be viewed as the final version ready for mass consumption. As the story goes, v3.0.1 may experience a reliability issue with a power management state, but v3.0.5 caps small file random write performance as to better separate the SF-1200 drives from the pricier SF-1500 drives. Our compadres over at AnandTech were able to put the (factory limited) Agility 2 SSD through its paces, and for the most part, it came out looking pretty decent. Critics found 5- to 10-percent performance gains when compared to Intel / Indilinx offerings, but unless you have to have the absolute best, paying extra for that bump may not be the most intelligent move. The other point here is that while the Agility 2 may be capped with the v3.0.5 firmware, at least its upgrade path is a lot clearer than the aforementioned Force; if you ever take v3.0.1 away from that unit, you can kiss that extra performance goodbye. Hit the source link for the full, drama-filled look.OCZ's Agility 2 SSD reviewed: despite limits, SandForce SF-1200 drive performs well originally appeared on Engadget on Mon, 26 Apr 2010 18:44:00 EST. Please see our terms for use of feeds.



Permalink | AnandTech | Email this | Comments