C4E's iXtreme LT+ v2.0 and 0800 v3 CFW

[Raptor]

C4E released the iXtreme LT+ v2.0 CFW for Toshiba-Samsung TS-H943 ('Samsung'), Philips-BENQ/LiteOn VAD6038/1650V ('BenQ') and Philips-LiteOn VAD6039/DG-16D2S ('Fat LiteOn') drives in association with Team Jungle & Team Xecuter (the LT+ v2.0 for 'Slim LiteOn', 'Fat/Slim Hitachi' have NOT been released yet). And he also released the 0800 v3 ('PC ripping FW') for 'BenQ' and 'Fat LiteOn':

* C4E's iXtreme LT+ in association with Team Jungle & Team Xecuter
Official release of the iXtreme LT+ v2.0
- Support for XGD3 ixtreme backups using LT-MAX for maximum capacity on standard DVD+R DL discs. Passes all security checks for XGD3 including correct capacity.
- Support for large capacity DVD+R DL media (no errors when burning)
I would like to dedicate this fw to the Xbox Live Enforcement Team and the recent false (AP25) bans and subsequent reversal. Keep up the good work guys.
Thanks go to Team Jungle for their hard work and efforts in the development process.
Thanks also go to Team Xecuter for their support to this project.

* Team Jungle Presents IXtreme 3.0 0800 firmware for Benq and Liteon drives
IXtreme fw for Benq and Liteon drives!
Features:
-Common API designed for easier application use!
-Support for SS V2!
-Support for AP25!
-Support for XGD3 ripping!
-Direct 0800 mode for game dumping including SS v2!
This firmware is =NOT FOR USE IN A CONSOLE= and is provided with the intended use of being in a dedicated "ripping" drive.
This means:
a. Does not need your DVD key,
b. Does not need spoofing as another drive,
c. Does not need to use the tray half open and
d. Does not need to use the activate.iso to use this firmware on the pc.

New JungleFlasher and Xbox Backup Creator coming later today.

Official Site: C4Eva, jungleflasher.net, team-xecuter.com
Download: n/a (might be illegal under DMCA/EUCD)

[Fear345]

Superb thanks

[ss30]

Waiting for the console version

[Pie]

Console ver out m8 for phat liton and benq

[ss30]

Console ver out m8 for phat liton and benq

is it this 0800 version then?

[AD]

Its both ss30. Just no hitachi or slim versions released.

-=AD=-

[ss30]

I read this

This firmware is =NOT FOR USE IN A CONSOLE= and is provided with the intended use of being in a dedicated "ripping" drive.

and thought it wasn't for the console

[Flat]

updated my fat liteon.
only problem - i forgot about the "half tray open" thing :-/

[barrysmith]

anyone burnt and played a gears yet? mine just says play game then loops back to dash?

[raelmadrid]

I read this and thought it wasn't for the console

try reading it all from top to bottom

[gandalf72]

I forgot the tray half open as well. Does this make a difference? drive is now flashed.

[Flat]

I forgot the tray half open as well. Does this make a difference? drive is now flashed.

i got wrong status codes when i wanted to erase it.
if yours went through - it worked i guess

[flik]

anyone burnt and played a gears yet? mine just says play game then loops back to dash?

I have exactly the same problem. 3 coasters and counting so far !

[raelmadrid]

stolen from TX:

As you may know (or may not know) when burning XGD3 titles with IMGBURN it throws up lots of errors (the backup still works just fine - the game partition is completely intact).

We have successfully tested Clone CD and even though the burns are the same as IMGBURN - it doesn't throw up a ton of errors so it's easier on the eyes and less clicking of popups

Quote:

<@c4eva> have verified clonecd version 5.3.1.4 burns xgd3 0800 isos correctly, same as imgburn

Software: CloneCD v5.3.1.4
Media: Verbatim 8x DVD+R DL
Hardware: Pioneer BDR-205
Image: 0800 v3 Rip (Liteon DG-16D2S & XBC v2.9 Build 345)

1. Select Write Image From File



2. Select the .dvd file of your XGD3 rip



3. As you can see the layer break is 2133520. Click Next.



4. You can set your Write Speed to whatever you like. As I use Verbatims I always set to Max. Never had a problem at 8x. Click OK.



5. Select "Write Until the End of the Media is reached" then click OK.



6. Success

[barrysmith]

games working now.

[flik]

games working now.

How so Mate ?

[Clubber Lang]

I downloaded Driver San Francisco but it didn't come with a .DVD file so I created one with notepad setting the layerbreak to 2133520. I then burned it using CloneCD and it burnt fine. When I put the game into the 360, which I flashed with the new f/w, it doesn't work. The 360 doesn't recognise the disc. Other backups play fine. Any help?

[REDBU11]

That driver image hasnt been ripped using the 0800 firmware , only games ripped with it will work

[Clubber Lang]

Oh no wonder, thanks for that

[eblaster101]

or wait for new abgx which im sure iwll fix those copies.