Just ran the fsd+dashlaunch dvd iso now get blank screen ?

[REDBU11]

Hi guys just had my 360 glitched and ran the fsd+dashlaunch dvd iso all went ok but now all i get is a blank screen , ive unplugged the harddrive but still just a blank screen ?

thanks

[rIKmAN]

Have you tried different cables, in sd and hd mode?
Have you tried resetting the video settings, maybe FSD has set a res that your tv doesn't support? (unlikely tho as I think it uses default dash settings)

[REDBU11]

tried hdmi and normal , can boot to the xell reload when pressing eject .

thanks

[slain]

Use the 360 Multi Tool to build a new dash image using your original NAND dump and then use xenon.elf to flash it via a USB stick in Xell. Make sure it's 14699 if you can.

[REDBU11]

yeah i read that but i havnt got my nand dump i have asked the guy who done it if he could email me it but i think there too big too email ? just dont no why its happened havnt even used it yet ;(

thanks

[BIG-TED]

Could be old dashlaunch and new dash combo. that causes the black screen of death.
If you can get xell try connecting up on the network, and getting the dump over ip from xell, run it through the newest j-runner and it will make a new updated flash for you with latest dashlaunch.

Ted

[slain]

The lad that did mine just uploaded a RAR with all the NAND dumps, ECC etc to Rapidshare.

[slain]

Could be old dashlaunch and new dash combo. that causes the black screen of death.
If you can get xell try connecting up on the network, and getting the dump over ip from xell, run it through the newest j-runner and it will make a new updated flash for you with latest dashlaunch.

Ted

This sounds like a better idea.

[REDBU11]

no idea what to do there sorry . it was on 14717 when i ran the iso it dwnloaded newest version of dashlaunch and fsd ?

thanks
plus wont the nand be corrupt or something ?

[rIKmAN]

Do what ted says, grab your nand through the browser and go from there.

[REDBU11]

not sure how ? i hav just run j-runner and it finds the cpu key but if i click on read nand it says
Device Not Found

what do u mean by browser ?

??

cheers

ive been in contact with the guy who glitched it and he's going to send me the nand in the morning when he's in his workshop so hopefully ill be up and running again lol cheers for all ure help guys

[macmilm]

Have started seein a few threads in various forums this last week with people havin probs with RGH consoles not workin in various SD/HD modes on various TV's/Monitors e.g some sayin probs on LG, some on SAMSUNG e.t.c ??

Could that be the issue here.... prolly early days if there is some incompatibility issue.... dunno. just me 2p.

[rIKmAN]

not sure how ? i hav just run j-runner and it finds the cpu key but if i click on read nand it says
Device Not Found

what do u mean by browser ?

Connect the xbox to your router, I assume your pc will also be plugged into it so they are on the same network and can "see" each other.

Boot into xell, and it will tell you the IP Address it has been given: 192.168.x.x

On your PC, open your browser (Internet Explorer/Firefox/Chrome) and type in the IP you got from the xell screen.

You should be able to get your nand over the network from here.
(from memory and a while ago when I did it, but think this is right)

Also, make sure you unplug the ethernet cable when you try to boot into the dash as if you have auto-signin enabled on a Live profile, it will try to login to Live which you don't want to do on a jtagged / RGH box - better safe than sorry!

[REDBU11]

yeah that actually worked but not sure what too do with it lol

cheers

[REDBU11]

Guys u are awsome im back up and running , got it to boot to freestyle on a usb pen as set up the dash as per the pdf included in j-runner so now need to no how to get my games on external hd to be seen as ive got fsd on that but it dont see it .

cheers guys

[REDBU11]

i can relax a bit now and breath lol

thanks guys

[bobo06]

Connect the xbox to your router, I assume your pc will also be plugged into it so they are on the same network and can "see" each other.

Boot into xell, and it will tell you the IP Address it has been given: 192.168.x.x

On your PC, open your browser (Internet Explorer/Firefox/Chrome) and type in the IP you got from the xell screen.

You should be able to get your nand over the network from here.
(from memory and a while ago when I did it, but think this is right)

Also, make sure you unplug the ethernet cable when you try to boot into the dash as if you have auto-signin enabled on a Live profile, it will try to login to Live which you don't want to do on a jtagged / RGH box - better safe than sorry!

I bought my console but it needs updated but have no files what so ever. Would I be able to do this to get my NAND and CPU info.

[REDBU11]

yes bob dead easy mate , u just enter the ip addy and it brings up a window with button menu to select what u want to copy etc , i also got my cpu key using j-runner but it wouldnt dump nand , but follow above and all should be sweet , i did as above then used the pdf included in j-runner and followed the guide on making a image .

any prbs just ask on this post and ill answer them as its fresh in my mind

thanks again to all above

[rIKmAN]

Glad you got it sorted mate.

Bobo, if you can boot to xell mate then yes you should be able to get your cpu key and nand through the browser as above.

[bobo06]

Sweet I was worried incase they CPU and NAND info was lost. I will give it a bash at the weekend.