3 in 1 can blocker for w222/w205/w217 advice

Thread: 3 in 1 can blocker for w222/w205/w217 advice

  1. jason9874's Avatar

    jason9874 said:

    Default 3 in 1 can blocker for w222/w205/w217 advice

    Hi got a s350 2016 model after July. I'm after a millage stopper. on the Internet this can blocker pops up alot of play and looks like a plug and play tool. would this need additional programing after instalation. has anyone used this before and if it's not good what's the best millage stopper for the w222 model
     
  2. coin-op's Avatar

    coin-op said:

    Default Re: 3 in 1 can blocker for w222/w205/w217 advice

    I advise you to look elsewhere. This place is not too keen on leeches.

    Sent from my XT1063 using Tapatalk
    Cheers - Coin-Op

     
  3. jason9874's Avatar

    jason9874 said:

    Default Re: 3 in 1 can blocker for w222/w205/w217 advice

    I don't know what you mean leech but if anyone who has used this before.
     
  4. Over Carl's Avatar

    Over Carl said:

    Default Re: 3 in 1 can blocker for w222/w205/w217 advice

    Look in the driver's footwell and you should find a little junction box that had loads of brown + brown with red stripe twisted pairs. There will also be another one with green + green with white stripe twisted pairs.

    If you cut all these wires and tape up the loose ends, no control unit will be able to send mileage over Interior or Engine CAN. I haven't worked with the new Flexray bus in these cars so I am not sure if additional consideration needs to be paid to this, therefore I am uncertain of the method to stop communication on that bus if needed.
     
  5. dibbler's Avatar

    dibbler said:

    Default Re: 3 in 1 can blocker for w222/w205/w217 advice

    You might want to read your welcome message and act on it.