Anyone know the wiring layout for a TX probe v3?

[raelmadrid]

The wires that connect to the switch have come loose and I need to know which pin solders to which wire

Does anyone have the layout or take a photo of theirs so I can repair mine?

Thanks in advance!

http://i.imgur.com/pBmBsuE.jpg

[Teajunkie]

pretty sure the loose red wire goes above the red wire still attached.
The other two can go either way on the opposite side of the switch as it just sends the brown wire to ground to get the drive to dump.
The best way to check is grab a meter and check.

Had some pics somewhere but it seems imageshack isn't loading

[raelmadrid]

thanks for reply bud, ended up buying a new one!