Close

Results 1 to 12 of 12
  1. #1
    DF Admin Teajunkie's Avatar
    Join Date
    Dec 2009
    Location
    Devon
    Posts
    4,227
    Thanks
    1,827
    Thanked:        1,824
    Karma Level
    568

    Advice Looking to ditch the hp n54

    Recently there have been a lot of users on my plex and the server just isn’t up to it anymore than 3 people and it stutters like fook.

    now my budget would be tight so is there a pc setup I can add 4 or more drives that can handle plex better?
    im looking at £300 max I know it’s not much but the boss would kill me as it is.
    it would need to be cased and ready to go not adding bits here and there as I don’t have the time.

    cheers guys.
    TJ
    Have you joined the DF discord server. https://discord.com/invite/YajVGQxDaw

  2. #2
    DF VIP Member gurry's Avatar
    Join Date
    Dec 2000
    Location
    Essex
    Posts
    1,121
    Thanks
    176
    Thanked:        82
    Karma Level
    347

    Default Re: Looking to ditch the hp n54

    Before ditching the kit have you considered a CPU and memory upgrade? Might work out cheaper

    That's what I did with my GEN 8 and it seems to work a treat now with 8 users
    PSN - ThirtyQuidKid

    Thanks to gurry

    Teajunkie (4th April 2018)  


  3. #3
    DF VIP Member pickie's Avatar
    Join Date
    Feb 2007
    Location
    Dorset
    Posts
    458
    Thanks
    40
    Thanked:        71
    Karma Level
    239

    Default Re: Looking to ditch the hp n54

    or create optimised versions, that's if its a transcoding issue

    2 Thanks given to pickie

    Over Carl (4th April 2018),  Teajunkie (4th April 2018)  


  4. #4
    DF VIP Member Over Carl's Avatar
    Join Date
    Apr 2006
    Location
    London
    Posts
    13,125
    Thanks
    3,975
    Thanked:        1,690
    Karma Level
    1251

    Default Re: Looking to ditch the hp n54

    First thing is to figure out what is your current bottleneck. I suspect it will be either internet bandwidth, CPU, or hard drive.

    If you open up task manager (or even better, resource monitor) you can figure out if your CPU or hard drive is being overloaded.

    Internet is a bit harder, the only sensible way I know is to get software that can monitor router using SNMP (easily found for free), but often cheap/domestic grade routers won't support SMNP which makes this method harder. You could look at network utilisation using task manager / resource monitor, but this will be only looking at your server NIC. Just for example one of your kids could be running bittorrent on one of their pc's 24/7 and you would never see this from the server, only from the router.

    If it's CPU/RAM, maybe worth considering upgrades - when people starting talking about these microserver's I turned my nose at the idea when I realised how little CPU grunt they had.

    If it's hard drive, then maybe time to consider moving the shared stuff to an SSD, or a RAID array (best to consider RAID 1, RAID 5 or RAID 6). If you go down the RAID route, software RAID is shite, and low end RAID cards are normally basically software RAID. Proper hardware accelerated RAID cards aren't cheap (unless you get them 2nd hand). From reading this forum, a few people seem to be big fans of UNRAID. I can't say I know too much about that except it seems to be an operating system as well as a software RAID version (that seems to perform better than regular software RAID). My personal opinion was that if it was that great, big businesses would have ditched their RAID cards to go to UNRAID, but I haven't tried it myself so I shouldn't really try to say which is better.

    Thanks to Over Carl

    Teajunkie (4th April 2018)  


  5. #5
    DF VIP Member pickie's Avatar
    Join Date
    Feb 2007
    Location
    Dorset
    Posts
    458
    Thanks
    40
    Thanked:        71
    Karma Level
    239

    Default Re: Looking to ditch the hp n54

    also what are the source files encoded in and what devices are trying to watch them ?, also have you updated the plex server software

    2 Thanks given to pickie

    Over Carl (4th April 2018),  Teajunkie (4th April 2018)  


  6. #6
    DF Super Moderator
    evilsatan's Avatar
    Join Date
    Jul 2004
    Location
    Essex
    Posts
    20,078
    Thanks
    1,105
    Thanked:        3,241
    Karma Level
    1540

    Default Re: Looking to ditch the hp n54

    Unfortunately the n54l has a soldered AMD chip and it is not really up to the task of transcoding for Plex, I was having trouble with one Plex client so seems like you've done well! I created a VM on my suped up Gen8 for PMS and then directed it to the media on my n40l which works fine.

    The Gen8 is an awesome Microserver, better than the latest model IMO as it supports plenty of Intel procs whereas the latest is AMD again (and I believe soldered...). You may be able to pick a used one up cheap, or if not and you were just interested in a PMS/media host you may be able to build a PC for less and use more appropriate hardware. The Plex forums are good to work out what features the processor etc should have, I don't believe PMS can offload the transcoding to a GPU but may be wrong (I looked into adding a GPU to my n40l for this purpose but it wasn't possible).

    2 Thanks given to evilsatan

    Over Carl (4th April 2018),  Teajunkie (4th April 2018)  


  7. #7
    DF Admin Teajunkie's Avatar
    Join Date
    Dec 2009
    Location
    Devon
    Posts
    4,227
    Thanks
    1,827
    Thanked:        1,824
    Karma Level
    568

    Default Re: Looking to ditch the hp n54

    God damn just wrote a massive reply and the site crashed.

    So short version...

    16gb ram and the cpu isn’t upgradeable.
    Internet is 77mb/20mb
    Plex always running latest build.
    media files are mixed Xvid etc.

    media there’s 12tb of it so ssd is a no go.
    Plex is set to transcode max 2 streams but I see 3-4 streams running everyday?

    Plex shouts cpu isn’t powerful enough to transcode stream if there’s more than 2 streams running.

    I was hoping there was a tower pc that could run 4-5 streams out of the box when I installed plex.
    Have you joined the DF discord server. https://discord.com/invite/YajVGQxDaw

  8. #8
    DF VIP Member MHP's Avatar
    Join Date
    Aug 2013
    Location
    The Clock End
    Posts
    552
    Thanks
    395
    Thanked:        323
    Karma Level
    161

    Default Re: Looking to ditch the hp n54

    If the £300 is burning a hole in your pocket then have a look at the Synology and QNAP NAS boxes. They both have native Plex apps. For £300 you will only get a bare box with no drives (unless you go second hand), so you may have to use your existing drives and upgrade later.

    Thanks to MHP

    Teajunkie (4th April 2018)  


  9. #9
    DF Super Moderator
    evilsatan's Avatar
    Join Date
    Jul 2004
    Location
    Essex
    Posts
    20,078
    Thanks
    1,105
    Thanked:        3,241
    Karma Level
    1540

    Default Re: Looking to ditch the hp n54

    This might make for useful reading:
    https://support.plex.tv/articles/115...ted-streaming/

    Thanks to evilsatan

    Teajunkie (4th April 2018)  


  10. #10
    DF VIP Member pickie's Avatar
    Join Date
    Feb 2007
    Location
    Dorset
    Posts
    458
    Thanks
    40
    Thanked:        71
    Karma Level
    239

    Default Re: Looking to ditch the hp n54

    transcoding uses a lot of CPU, idealy your media should be in MP4 H264 format with a stereo sound track you can create these with in plex server in the " optimised versions" section, as a lot of devices will direct play that, thus not needing transcoding,

    for £300 quid I don't think your going to get a very good nas that will handel 4 ppl, esp if there all transcoding

    Thanks to pickie

    Teajunkie (4th April 2018)  


  11. #11
    DF VIP Member
    jaygo's Avatar
    Join Date
    Sep 2006
    Location
    IN A HOUSE
    Posts
    2,191
    Thanks
    283
    Thanked:        332
    Karma Level
    388

    Default Re: Looking to ditch the hp n54

    What about trying to get a 2nd hand gen8 server?

    I know someone local to me might be looking to sell his

    (I’m not trying to broker a sale)
    If he is I’d be happy to work it out and go via BST section etc


    Sent from my iPhone using Tapatalk

    2 Thanks given to jaygo

    Over Carl (5th April 2018),  Teajunkie (4th April 2018)  


  12. #12
    DF General DogsBody
    Mickey's Avatar
    Join Date
    Nov 2006
    Location
    Digital Forums
    Posts
    16,955
    Thanks
    1,879
    Thanked:        2,077
    Karma Level
    1253

    Default Re: Looking to ditch the hp n54

    Quote Originally Posted by jaygo View Post
    What about trying to get a 2nd hand gen8 server?

    I know someone local to me might be looking to sell his

    (I’m not trying to broker a sale)
    If he is I’d be happy to work it out and go via BST section etc


    Sent from my iPhone using Tapatalk
    if so please make a new post in that section

    Thanks to Mickey

    Over Carl (5th April 2018)  


Similar Threads

  1. Decided to ditch TV Licencing
    By burner1 in forum The Dog and Duck
    Replies: 68
    Last Post: 5th April 2013, 06:46 PM
  2. Windows 8 To Ditch DVD Support?
    By DF Bot in forum Windows 8
    Replies: 5
    Last Post: 6th August 2011, 08:55 PM
  3. Where to ditch the car after a blag
    By Wizzo in forum News & Current Affairs
    Replies: 6
    Last Post: 7th June 2008, 01:02 PM
  4. good way to ditch Tiscali
    By jimboozer in forum Internet Connections & VPNs
    Replies: 3
    Last Post: 25th April 2005, 01:21 PM
  5. BT to ditch 24/7 unmetered service
    By marcode in forum The Dog and Duck
    Replies: 8
    Last Post: 1st October 2002, 10:03 PM

Social Networking Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •