Is it possible to 3D print replacement cogs yet, & if so where ?
My antenna positioner has (had) what can only be described as a wax type cog in it which has broken. The cogs teeth are fine & the diameter is approx 3cm in size. If i can fix then great, if not then... thats life.
If anyone here would like to give it a go i can send the remains of the cog for them experiment with
.[Only registered and activated users can see links. ]
Last edited by josweet; 8th June 2018 at 11:36 PM.
if you measure the cog and count the teeth I can do you a design in fusion 360. You'll need to measure to where the teeth should be, not the size of the cog now. As for 3d printing I haven't got a fine enough nozzle. Mine is a 0.4mm which looks way too big for those teeth. You'll also need to print it in nylon (which I don't print in) otherwise it'll be chewed up in minutes.
Having a second look at the pic, it looks like a double cog, with a much smaller one hidden underneath. Ill try and get it out completely over the next few days and take some high res pics.
@Beerman, would you still be able to make a design if its a double cog, how difficult would it be for it to be accurate mate.
@ DF Jedi, thanks, but i dont theyll work, as it looks kinda special. Ill know more when im able to get it removed.
Just the fact that some geniuses were laughed at does not imply that all who are laughed at are geniuses. They laughed at Columbus, they laughed at Fulton, they laughed at the Wright brothers. But they also laughed at Bozo the Clown.