Close

Results 1 to 6 of 6
  1. #1
    DF Super Moderator BIG-TED's Avatar
    Join Date
    May 2001
    Location
    Leics UK
    Posts
    2,022
    Thanks
    447
    Thanked:        881
    Karma Level
    422

    Default 360 with error 0001

    Been a while since I had a mess around with a 360, but one i gave to a friend a few years back returned, worse for wear, was going to bin it but it's rgh, so I thought let's have a play.
    A lot of the sites with information have closed down.
    Apparently these with this code can be a royal pain in the ass to fix. With power supply plugged in and power button pressed fans get power for about and 1/8 of a second and then led on supply goes red.
    The problem is hardware issue, if you have been tinkering it's normally a short somewhere, check ports for shorting, mine not that either.
    Next is test the mosfets, near the cpu at the front side of the board, They need removing from the board to test and are a right pita. I robbed a couple from a scrap board and swapped them wasn't that.
    Then I unplugged the fans and hit the power button and a cap blew it's top, just as I was leaning over, a face full of cap smoke.

    There were several bulged caps, so swapped them from scrap board.
    The one In the circle was the fault to prevent booting, you can see the top of the one below it ready to pop.
    It now boots but with no hdmi, looks like a hana fault so I've ordered a couple of chips on slow boat from China, when they arrive I'll ball them up, fit and see what happens.

    You can test standy voltages at the top 'fets,
    Should be
    Red 5v
    Pink 3.3v
    Grapefruit 1.8v

    Ted
    Spoiler:
    Spoiler:
    Lots of my repairs and pictures of retro stuff on my twitter.

    https://twitter.com/Big_ted1?t=s9zEZ...Z-npEyeKA&s=09

    Thanks to BIG-TED

    tef89 (25th September 2018)  


  2. #2
    DF Super Moderator piggzy's Avatar
    Join Date
    Jul 2014
    Location
    UK
    Posts
    3,540
    Thanks
    3,063
    Thanked:        1,553
    Karma Level
    371

    Default Re: 360 with error 0001

    Wow. Been here loads of times but seems like such a long time ago.

    Its funny but at the time you felt like 360s were infixable etc, now thats how I feel about the ONE but would happily open up and sort a 360 lol

    Sadly I cant remember fuck all about em.

    Still hilarious to think that thousands of those fuckers were baked in the oven in a tea towel.

    Thanks to piggzy

    BIG-TED (24th September 2018)  


  3. #3
    DF Super Moderator BIG-TED's Avatar
    Join Date
    May 2001
    Location
    Leics UK
    Posts
    2,022
    Thanks
    447
    Thanked:        881
    Karma Level
    422

    Default Re: 360 with error 0001

    It's amazing how quick you forget stuff you don't use daily, then all the resources you used to visit have gone, so your kind of left to your own devices, trawling old cached web sites for info.
    Like you said the info that is still out there is wrap it in a towel, heat gun it, or get some m5 screws because it'll definitely be the gpu...

    I can't remember how to set up the scottle, should be able to youtube that though.

    Ted
    Lots of my repairs and pictures of retro stuff on my twitter.

    https://twitter.com/Big_ted1?t=s9zEZ...Z-npEyeKA&s=09

    Thanks to BIG-TED

    piggzy (24th September 2018)  


  4. #4
    DF Admin Teajunkie's Avatar
    Join Date
    Dec 2009
    Location
    Devon
    Posts
    4,228
    Thanks
    1,827
    Thanked:        1,825
    Karma Level
    568

    Default Re: 360 with error 0001

    Fuck me mate I binned so many of those 001’s lol not worth posing about with.
    console had to be worth £5 max just grab one on eBay for a tenner.
    Have you joined the DF discord server. https://discord.com/invite/YajVGQxDaw

  5. #5
    DF Super Moderator BIG-TED's Avatar
    Join Date
    May 2001
    Location
    Leics UK
    Posts
    2,022
    Thanks
    447
    Thanked:        881
    Karma Level
    422

    Default Re: 360 with error 0001

    I was going to bin it, but thought i'd get the old grey matter working. Got about 5 knocking around the house anyway, don't need another but it's the challenge and if it gets too frustrating can attack it with a hammer.

    Ted
    Lots of my repairs and pictures of retro stuff on my twitter.

    https://twitter.com/Big_ted1?t=s9zEZ...Z-npEyeKA&s=09

    2 Thanks given to BIG-TED

    piggzy (25th September 2018),  Teajunkie (25th September 2018)  


  6. #6
    DF Admin Teajunkie's Avatar
    Join Date
    Dec 2009
    Location
    Devon
    Posts
    4,228
    Thanks
    1,827
    Thanked:        1,825
    Karma Level
    568

    Default Re: 360 with error 0001

    Lol.



    Have you joined the DF discord server. https://discord.com/invite/YajVGQxDaw

Similar Threads

  1. Read Disc Error
    By fitzy in forum Sony Consoles
    Replies: 3
    Last Post: 3rd October 2002, 08:53 PM
  2. Halo dirty/damaged disc error
    By ohayo in forum Microsoft Consoles
    Replies: 2
    Last Post: 2nd October 2002, 04:28 PM
  3. X-box error codes/sequences
    By toibs in forum Microsoft Consoles
    Replies: 8
    Last Post: 12th September 2002, 12:01 PM
  4. Dirty Disc Error
    By Frontiers83 in forum Microsoft Consoles
    Replies: 1
    Last Post: 7th September 2002, 12:39 AM
  5. GTA3 "Infinite loop" error
    By Mr Tac in forum PC Gaming
    Replies: 2
    Last Post: 6th September 2002, 11:57 AM

Social Networking Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •