Close

Results 1 to 5 of 5
  1. #1
    DF Super Moderator BIG-TED's Avatar
    Join Date
    May 2001
    Location
    Leics UK
    Posts
    2,022
    Thanks
    447
    Thanked:        881
    Karma Level
    422

    Xbox Rgh 3 for 360s except Winchester boards.

    Been out a while, rgh 3 is similar in wiring to the old jtag method.
    You need a way to read and write the nand and then a few wire points joined on the board with a resistor.

    Thats the basics no rgh chip needed.

    https://www.se7ensins.com/forums/thr...-tool.1832979/

    Might have to grab a console to have a go, not seen it done myself yet so have no idea if its instant boot.

    Ted
    Lots of my repairs and pictures of retro stuff on my twitter.

    https://twitter.com/Big_ted1?t=s9zEZ...Z-npEyeKA&s=09

    2 Thanks given to BIG-TED

    4me201 (19th September 2022),  Teajunkie (9th July 2022)  


  2. #2
    DF Admin Teajunkie's Avatar
    Join Date
    Dec 2009
    Location
    Devon
    Posts
    4,228
    Thanks
    1,827
    Thanked:        1,825
    Karma Level
    568

    Default Re: Rgh 3 for 360s except Winchester boards.

    Glad I’m not doing consoles anymore.
    I can just Imagine how many consoles I would have been sent to repair after muppets trying this and killing it.
    Have you joined the DF discord server. https://discord.com/invite/YajVGQxDaw

  3. #3
    DF Super Moderator BIG-TED's Avatar
    Join Date
    May 2001
    Location
    Leics UK
    Posts
    2,022
    Thanks
    447
    Thanked:        881
    Karma Level
    422

    Default Re: Rgh 3 for 360s except Winchester boards.

    A quick and dirty mash up, to test it.
    Used a falcon board.
    Boots instant to xell using eject button and instant to dash using power button.

    Must say I'm Impressed.

    Used 10 mhz on the setting and a 22k resistor.

    The band on the diode goes to the board near the xclamp point.

    20220709_120238.jpg

    https://youtube.com/shorts/NFXs-N5Y6SA?feature=share

    https://youtube.com/shorts/NpmVXXlbJ1U?feature=share
    Lots of my repairs and pictures of retro stuff on my twitter.

    https://twitter.com/Big_ted1?t=s9zEZ...Z-npEyeKA&s=09

  4. #4
    DF Admin Teajunkie's Avatar
    Join Date
    Dec 2009
    Location
    Devon
    Posts
    4,228
    Thanks
    1,827
    Thanked:        1,825
    Karma Level
    568

    Default Re: Rgh 3 for 360s except Winchester boards.

    Good work there ted.
    Shame this took so long to come about. 10-15 years ago would have been great.
    Have you joined the DF discord server. https://discord.com/invite/YajVGQxDaw

    Thanks to Teajunkie

    ss30 (13th July 2022)  


  5. #5
    DF Super Moderator BIG-TED's Avatar
    Join Date
    May 2001
    Location
    Leics UK
    Posts
    2,022
    Thanks
    447
    Thanked:        881
    Karma Level
    422

    Default Re: Rgh 3 for 360s except Winchester boards.

    After testing, every now and again it doesn't boot correctly, controller doesn't sync at start or hangs on the xbox swirl. which is standard on phats by all accounts.something to do with it not quite slowing enough on phats.
    Only about 1 in 20, so pretty manageable.
    Lots of my repairs and pictures of retro stuff on my twitter.

    https://twitter.com/Big_ted1?t=s9zEZ...Z-npEyeKA&s=09

Social Networking Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •