ATX Size ?

Thread: ATX Size ?

  1. josweet's Avatar

    josweet said:

    Default ATX Size ?

    Im building a cheap rig for a mates son who has a very tight budget.
    I have the board and just need a cheap blingy case, something that his kid will like.

    The board he has is this > [Only registered and activated users can see links. ]

    And the cheapest blingy case i can find is this> [Only registered and activated users can see links. ]

    After looking at so many case's, i could do with someone to double check this board (GA-Z87-HD3) is going to physically fit.
    If anyone has any other case recommendations, that'll also be much appreciated.
     
  2. Mickey's Avatar

    Mickey said:

    Default Re: ATX Size ?

    Dimensions of a full-size ATX board are 12 9.6 in (305 244 mm), which allows many ATX chassis to also accept microATX boards. The official ATX specifications were released by Intel in 1995 and have been revised numerous times since. The most recent ATX motherboard specification is version 2.2.
    [Only registered and activated users can see links. ]


    Mobo Support: ATX, Micro ATX, ITX

    so any ATX form factor will fit including the biggest to the pica

    Gigabyte GA-Z87-HD3 Intel Z87 Socket 1150 Motherboard

    Gigabyte GA-Z87-HD3, Intel Z87, S 1150, DDR3, SATA III - 6Gb/s, SATA RAID, PCIe 3.0 (x16), D-Sub (VGA) DVI-D HDMI, ATX

    [Only registered and activated users can see links. ]
    Last edited by Mickey; 1 Week Ago at 08:18 PM.
    [Only registered and activated users can see links. ]
     
  3. lou3b's Avatar

    lou3b said:

    Default Re: ATX Size ?

    That case and motherboard should fit together just fine.
     
  4. josweet's Avatar

    josweet said:

    Default Re: ATX Size ?

    Thanks all. Ordered it over the weekend, so will find out come the weekend