Close

Results 1 to 4 of 4
  1. #1
    DF PiMP josweet's Avatar
    Join Date
    Aug 2006
    Location
    uk
    Posts
    399
    Thanks
    161
    Thanked:        318
    Karma Level
    217

    Default Car Diagnostics software.

    Any recommendations on some good (downloadable ) software that can be used on a tablet & connects via bluetooth.

    Update>
    After a while reading up, it seems the one everyone is hack1ng is EasyDiag scanner.
    The mod involved opening up the bluetooth dongle and updating with modified software.
    This cheap little device is what is used to update the dongle> [Only registered and activated users can see links. ]

    All the info for it is at the following URL, however without making a donation .. nothing is downloadable !
    [Only registered and activated users can see links. ]

    Another site for files is here If you can speak Russian> [Only registered and activated users can see links. ]
    Last edited by josweet; 1 Week Ago at 03:23 AM.

    3 Thanks given to josweet

    JonEp (1 Week Ago), Over Carl (1 Week Ago), rusty (1 Week Ago) 


  2. #2
    DF Member RaMx's Avatar
    Join Date
    Nov 2017
    Location
    UK
    Posts
    41
    Thanks
    3
    Thanked:        19
    Karma Level
    46

    Default Re: Car Diagnostics software.

    I brought a Clarke scanner which found and cleared my fault..
    Is the one you are talking about more comprhensive?
    [Only registered and activated users can see links. ]

  3. #3
    DF Jedi plug1's Avatar
    Join Date
    Jan 2001
    Location
    glesga
    Posts
    1,978
    Thanks
    385
    Thanked:        251
    Karma Level
    373

    Default Re: Car Diagnostics software.

    good thread .. i got launch X diag from a good friend on here .. hes not been too well . but i give input

  4. #4
    DF PiMP josweet's Avatar
    Join Date
    Aug 2006
    Location
    uk
    Posts
    399
    Thanks
    161
    Thanked:        318
    Karma Level
    217

    Default Re: Car Diagnostics software.

    The hardware of choice used is >
    (Price is in GBP, but D.F not supporting the pound symbol, so used the dollar one instead.

    Amazon fire 7 32gb tablet $60 new > (cheaper used on the bay)
    Spoiler:
    [Only registered and activated users can see links. ]

    And this case $8 >
    Spoiler:
    [Only registered and activated users can see links. ]


    Found this d/l on the Russian forum.
    Download for link for X431_EUROTURBO apk>

    Spoiler:
    [Only registered and activated users can see links. ]


    What is now required to patch 431 are the two following applications>

    1> DiagBaseService_App_V1_00_007_EN
    2> VIN_RECOGNITION_APP_V1_01_005_EN DPULinkManagerServices_V1_00_024_EN

    If you have skype then the mhhauto.com user Alonewolf can help with dongles >Skype:olegich20122


    Instructions>
    1. Connect your phone(tablet) to computer. Copy inside your phone(tablet) the X431 application and the 3 additional programs.
    2. Install X431 application, open it and exit. The program installed will create folders and files.
    2a. After install the 3 additional programs.
    4. Folder 968590 ------ rename to the number of your scanner, for example, in 968590048652 (the numbers are written arbitrarily).
    5. We put in each brand your license file (LICENSE.DAT) from EOBD 22.53 like this: 968590------\DIAGNOSTIC\VEHICLES\brands\folder with numbers.
    6. Copy the folder with the serial number of your scanner to the folder cnlaunch\X431Pro3S.
    6a. The path should look like this: cnlaunch\X431PRO3S\968590------\DIAGNOSTIC\VEHICLES\brands.
    7. Go to Application Manager on your phone(tablet), find the program X-431 PRO3 force stop it then clean cache and data. Usually in Memory is cleaned.
    8. Now run X431 program and look if you have car brands inside.
    9. Connect the scanner to your car obd2 socket.
    10. Launch bluetooth and make sure that your phone has found your scanner.
    11. Open the desired car brand.
    12. Firmware will be updated automatically (Firmware 11.70).
    12a. In the archive is the firmware for old scanners. Firmware for the new below.
    13. If the firmware is not updated automatically, the brands will not start. Then you need to go to Profile and click on the "Update Firmware".
    13a. Wait for the update to finish and run the brand again.
    13b. In the shell you can throw a few versions of brands and use any of from list.
    Last edited by josweet; 3 Days Ago at 01:59 AM.

    Thanks to josweet

    JonEp (2 Days Ago) 


Social Networking Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •