I've got a box branded C&W and its stuck on updating..
it says.
Importatant
PLease do not switch off.
Your box is updating
This may take a few minutes.
I cant get in the Eng. menu and Ive tried 4321..
anything else?
cheers
I've got a box branded C&W and its stuck on updating..
it says.
Importatant
PLease do not switch off.
Your box is updating
This may take a few minutes.
I cant get in the Eng. menu and Ive tried 4321..
anything else?
cheers
Hold down the up/down keys in the center of the box then power it up keeping them pressed until you see the engineers screen.
You will need a scart lead connected to see the engineers screen.
good luck m8
thanks for the reply m8 but there's no way I can get the eng menu.. it just defaults to the 'update page'
cheers
u need to pull the red jumper
The box will need to be reflashed to fix m8
it has crashed when it was updating ,or the power has been pulled during the update.
the only way to fix it without removing the atmels is to
put it in to serial download and use winsect
and the one person that knows how to do it is not telling !
the reason you cant get the eng. menu is bcoz its part of the
middle ware (that is now corupted)
and 4321 wont work as the net id is now gone
the txt will keep scrolling `no baud`
plug1
are you psychic plug? ive had boxes that go to updating screen that are fixed when the jumper is pulled. he needs to try that first if he already hasnt...
and whos the loser that knows how to use winsect and not telling?
Dude i wish i was psychic
but chances are he has tryed that long b4 he posted on hear
my presumption being most ppl are not that stupid
but hay wot do i know ,im not psychic
"and whos the loser that knows how to use winsect and not telling"
use search then you tell me ....
plug1
thanks for replying m8s
is there a correct procedure for 'pulling the red jumper'?
cable in/out?
power on/off?
cheers
"and whos the loser that knows how to use winsect and not telling"
use search then you tell me ....
plug1 [/B][/QUOTE]
I've recently worked out how to use it, its not difficult, the only problem lies with the digital signature check that the box does (4000), it fails due to the signature not being in the file.
Hence the error 31 on screen which means - Digital Signature Failed.. i should imagine its md5. ive tried a few dumps that were straight from a working tw 4000 box. none of them are signatured and hence the box rejects them all, so whomever has claimed they have it working either is lying or has the digital sig.. my guess is that they are lying.
As for pulling the red jumper, unplug the box , remove the jumper for about 30 secs, then replace and set network id etc in lib debug, if you are on tw i would also do the anti update mod as you definately do not want this box trying to update..
it will wipe the software including the middleware, so no more eng menu!
Yes be careful the box will erase the software. It doesn't have enough memory to hold the TW cr3!!
thanks..I'll try the red jumper procedure again..
cheers
Is your box continuously showing PACE?
yes it is..
I tried the red jumper and libdebug but the get network Id line stayed incorrect..
thanks for the replies
Sorry you're box has erased it's software. Only thing to do is reflash the atmels or wait until we find out how to use winsect properly.
thanks again m8
what does winsect do then?
Does anyone have any info on Winsect?
cheers
Last edited by rutters; 5th July 2003 at 07:44 PM.
Social Networking Bookmarks