Originally Posted by
jojo
try setting your lpt port to epp/ecp then clean up the phone connector pads (a slight waxy glaze is enough to cause no contact). open the program with the phone already plugged into the lpt dejan flasher set, do not attempt to power the phone until you are ready to flash and you are asked to power on. if all this fails try to do a full erase with knok, make sure the programs lpt ports are set ( sometimes a reboot solves the problem ) also make sure you pick the right phone, even though it says its a 3310 it could be a 3330 this will also prevent it from connecting.......good luck and dont give up its good to learn
Social Networking Bookmarks