hi is there any new software out there to unlock a panasonic gd87 it is only 4 weeks old i have uesd software to try and read the phone which then gives me a code for me to type in but the software well not read the phone
the phone is on t-mobile
hi is there any new software out there to unlock a panasonic gd87 it is only 4 weeks old i have uesd software to try and read the phone which then gives me a code for me to type in but the software well not read the phone
the phone is on t-mobile
If the program does not give u a code then u need to downgrade it to a lower version v A22 or lower and then read the codes. Then u can upgrade it again. Look for a program called winmodo 3.3 i think. U will also need to find the flash file as well. Make sure u have full battery when down/upgrading otherwise these fones have been known to be dead for good !!! Use at your own risk !!!!
Read for downgrading the Panasonic GD87
<HR style="COLOR: #000000" SIZE=1><!-- / icon and title --><!-- message -->the downgrade has worked and im going to tell you how to do it.
okay we will need the program so go to:
http://www.vsh-gsm.com/free.htm
And download "WinMoDo 3.3b"
also vist here:
http://www.vsh-gsm.com/freefls.htm
and download the flash file:
"GD87 A22"
unzip the language pack is inculed so your on your way now
now open "WinMoDo 3.3b"
and load the image file and language file
"NOTE Make sure the "BOOT" "MAIN" "LANGUAGE" are selected "GREEN"
now select the panasonic GD87 phone from the drop down menu
also change the "BAUD RATE" to - 115200
Then put your data cable into your mobile then click start download when it says "Signalling" press the power on button then it should do it all
then use Panasonic GD6x/GD8x Code Reader
which can be downloaded from here:
http://www.unlocker.ru/software_dow...D8x.zip&Rec=124
now your phone will be unlocked
worked great for me have fun
if the software aint on the links above try this 1
http://www.webuponthe.tk
<!-- / message --><!-- edit note -->
hi m8
ive tried your method but it comes up press power..........time out
im using a usb cable on com 5.ive tried the other com ports as well but still no luck.
any ideas?
thanx
A USB cable will not work on "com ports" m8, you need the serial datacable to do this.Originally Posted by eggmany2k200
argggghhh man!
thanks anyway.
any idea where i can get a cheap 1?
right
i've managed to get the codes but im not sure wat to do with them now?
pr1...code
pr2...code
net... code
how do i use em ,any help would be appreciated
thanks
sorry it keeps comin up security failure,emergency calls only!
Social Networking Bookmarks