Seca 2 Help

[z3spacial]

OK, been out of the Sat World for a while and was hoping someone here could help. What do I need to watch Seca 2 stuff on 19.2 deg E - ie, Taquilla, Palco etc

I have an Elvis, Aston Cam 1.05 - what chards do I need - I hear the hexes are out there - will multiprog burn the card for me - a step by step approach would be nice - any links would be a bonus.

And thanks for your help

[eddie20]

Hi
I found this on satdudez forum thanks go to echelon for this info.
Yes the elvis will programme the titanium card.

Open up the elvis prog. Go to setup checkyour com port setting usually com1. Click the next tab MP set, 4 tabs on the left hand side Click( power on) then below that there is power off then phonex click (phoenix). Minimise elvis.

Open up titanium card programmer V1.10 , click on the green arrow to connect programmer. All the other functions will be hi-lighted.

Erase card first ( this is most important ), then Load files onto card, Burn, then disconnect. Card should be working.

Not as well as some others would have explained it but it is my way I hope it helps.

ps:- multiprog v1.51 will erase and burn the card itself , so no need for card progger v1.10 unless you want to downgrade the os to v1.03 from v1.06 etc. just dont have the elvis in phoenix mode , just load and burn the files similar to you would with a funcard
and yes tit card with a aston 105 cam will open s+ca 2 on 19.2 east and 13 east hope this helps.

eddie20

[RhinoBanga]

Hi,

Can anyone tell me where to get a Titanium card please.

[eddie20]

Hi
They are like gold dust at the moment you could try [hisat] go for blue tit card.

[RhinoBanga]

Thanks eddie.

[z3spacial]

OK. So now i have my Titanium card, upgraded to 1.06 (it's white tho - bought from Westland Electronics at Bowlers). I have dumped various hexes on it both with Titanium Prog 1.10, 1.90, Multiprog 1.60 and still can't clear ANYTHING on my Aston Cam 1.05 - does the catd Have to be blue ? SHould I take it back ?


HELP!!! (Please)

[eddie20]

Hi
This is what i have found out on satdudez forum with white tit downgrade to os 103 with Titanium Prog 1.10 then load using file 2 on the gorans Who Let The Dog Out V1.0 it works ok with aston 105 cam. you can find the file at dudezs or toes .

hope this help eddie

[4me2]

OK. So now i have my Titanium card, upgraded to 1.06 (it's white tho - bought from Westland Electronics at Bowlers). I have dumped various hexes on it both with Titanium Prog 1.10, 1.90, Multiprog 1.60 and still can't clear ANYTHING on my Aston Cam 1.05 - does the catd Have to be blue ? SHould I take it back ?


HELP!!! (Please)

you lucky git m8, Ive been waiting 4 weeks for one.

Go over to Satdudez for files but MAKE SURE the files you use state they are ok for whit cards . There are killer files out for white cards so only use confirmed files from Satdudez or TOECUTTERS.

[the_wizzard]

blue or white,it don't matter it's hit and miss with aston's and titainium's at the moment!! magic\matrix work's ok as do wce emu+season with hummy 5400,for me.

[the_wizzard]

Hi
This is what i have found out on satdudez forum with white tit downgrade to os 103 with Titanium Prog 1.10 then load using file 2 on the gorans Who Let The Dog Out V1.0 it works ok with aston 105 cam. you can find the file at dudezs or toes .

hope this help eddie

i have used that file + other's on blue tit,and aston 105 picture just come's on for a second then go's cam error!! i'm gettin a couple of g\box's tomoz to test it with.

[z3spacial]

OK Thanks for your help. Still not getting any results. Can someone pm me the Satdudez and/or toes link - would appreciate it - ta

[4me2]

http://www.satdudez-forumz.com/forum/

http://64.235.50.126/~takula/forum//index.php?s=

stalagden.com
thecutteroftoes.org
thedenboothill.com
phillsfileguys.com
toecuttersdenbackup.com
toecuttersden.org
toecuttersden.net
toecuttersden.com
toecutterden.co.uk
fookfiles.com
http://64.235.50.126/%7Etakula/forum/index.php?s=

[z3spacial]

Excellent List 4me2 - 'preciate it. I now have Free Tequilla

Thanks to Eddie too