2000 box with different layout

**satzzz** · 19th September 2004

Got a 2000 box here on which the normal greyish remote does not work.On looking inside at the board the front LED only has one ribbon cable going from it to the main board and not the two like in most cases.What remote will operate this type of box??
Any ideas guys?

**satzzz** · 19th September 2004

I tell a lie the 2000's only have one ribbon cable coming from the front LED,but still the remote work work with it.Oh and YES i've checked the batteries!!! LOL

Got 2 remotes here and neither work with it.Hmmmmmmm

**satzzz** · 19th September 2004

Ok here's the latest.I've swapped the front LED displays around from the dodgy 2000 with another one I have in my bedroom and I now know that it's not the problem.Where could I start to look now??

**the_wizzard** · 19th September 2004

have you tryed the new style ntl rc? not the blue one.

**satzzz** · 20th September 2004

I haven't to tell you the truth as I don't have one,but I thought the grey ones with the green bottom should be the ones.
I've been told to boot up in libdebug and look to see if the IR is disabled in it,so that's my next port of call.

**satzzz** · 20th September 2004

Mmmm,not libdebug.Back to the drawing board.

**satzzz** · 20th September 2004

Been told that there's somewhere in the engineers menu that you can alter the IR settings but i'll be damned if I can see them on ANY of the 17 pages!!
Anyone shed some light