£13.99 for a cable and then you got nearly £7 delivery on top of that.
Joke or what.
£13.99 for a cable and then you got nearly £7 delivery on top of that.
Joke or what.
cheers for the software , i modded the cable that comes with the E616v , as Fig1 below and software would fail , so i resoldered as Fig2 shows and all working fine on E616v SV18 , To enter the generated codes on this model , put 3G simcard in , power on now on the screen where u would key someones number as if you were going to call them type your codes , NCK code 1st and SPCK code and unlock WILL be successful
hope this clears a few things up for those having problems
thanks to spunlock for crack :tongue
thanks to bieshwit for original post and share :thumbs
thanks to Spawn Killer for links and fixing my cable
regards to all
hydr0
Last edited by hyDr0; 6th January 2005 at 11:21 PM.
wierd problem ... rite i've unlocked this E616v (as above) , after unlock *#7320# (network lock off) , tried o2 simcard = works fine , tried vodafone simcard = works fine , tried t-mobile simcard doesnt even show you emergency screen at startup just sits on the NEC screen that is shown before the 3g logo and hangs, no buttons do anything? .... is there sum sort of settings to sort this out whilst a working simcard is in ....like adding the network to the networks lists?... can anyone shine any light on this
cheers
hydr0
Maybe you need to put it on "Automatic Network Selection"
Or possibly you have only unlocked it to work on the o2 and Voda networks ??
checked that automatic was selected , it was , rechecked mobile deffo network locks perm off , i've just searched around and found on another forums ..."new t-mobile simcards dont work in the nec616v after unlock , as this is due to some sim profile or voltage issue u may find older t-mobile simcards may work ok."
cheers for your input termy :thumbs
looks like i'll av to use o2
hydr0
Same problem with mineOriginally Posted by hyDr0
Ed
This is a common problem, but sadly no fix
Would it be possible to clone the sim onto a different sim?
modded the cable but cant seem to get the drivers installed - is there any special way to do this?
Thanks
Me to cant seem to get the usb drivers installed, is there any special way to do this?
cheers
2e
Finally got em installed - just deleted the driver it was using from the windows/inf/ directory and removed the hardware from devices - rebooted and it detected and i browsed to the drivers and installed them all.
Hi Manic
I'm still having problems locating the file in windows/inf/directory could you give me the name of the file you deleted please.
cheers
2e
check in your device manager and you will see either nec or unknown device under the usb tab - check the properties and update driver it will tell you that the driver it is using the the best Just note the path and filename - browse to that dir and delete the file.
Reboot with fone unplugged and then follow instructions.
I had to change the properties so i could view hidden folders etc.
Hi Manic
Thanks for your help, all working now just waiting for the new comport lead. I have seen today on an xp laptop the unlocking software , do you know if there is another version of this software that works on xp as mine only works on win 98? and i don't think this guy today paid money for it. Thanks again.
2e
Social Networking Bookmarks