Close

Results 1 to 10 of 10
  1. #1
    DF Member jahbarrie's Avatar
    Join Date
    Jul 2007
    Location
    Notts
    Posts
    31
    Thanks
    0
    Thanked:        0
    Karma Level
    0

    Default smart card help pls

    following novice angel guide trying to unlock and read card with XNCS 1.8 for sammy 2100 keep gettin a blank page when i get to the point to read eeprom all other steps seem to have went through as in the instruction but don't know wat i'm doing wrong been over it a couple a times with same result. am i doing something wrong or should i use a dif sofware some help pls. i'm using the infnity usb phoenix programmer.

  2. #2
    DF VIP Member BEZO's Avatar
    Join Date
    Jul 2001
    Location
    uk
    Posts
    3,182
    Thanks
    92
    Thanked:        39
    Karma Level
    654

    Default Re: smart card help pls

    infnity usb phoenix programmer
    u can't unlock a card with this m8 it for reading and writing cards
    u need a unlooper to unlock rom cards.

    u are trying to get bk and ird anit ya
    if so u need a unlooper to unlock card.

    or u can read box with a jtag for the info


    bezo

  3. #3
    DF Member jahbarrie's Avatar
    Join Date
    Jul 2007
    Location
    Notts
    Posts
    31
    Thanks
    0
    Thanked:        0
    Karma Level
    0

    Default Re: smart card help pls

    thanks m8 just a niovice so hope it don't come across silly but after using jtag to get bk and ird thats when i then use the phoenic to write image right? so what was all that in the novice angel about going through it with this method. the car is a DNASP011 RevB0D is that unlockable its the one that came with the box. any help would be greatly appreciated thanks.

  4. #4
    DF VIP Member BEZO's Avatar
    Join Date
    Jul 2001
    Location
    uk
    Posts
    3,182
    Thanks
    92
    Thanked:        39
    Karma Level
    654

    Default Re: smart card help pls

    unless u got an unlooper m8
    u will not do it,some cards are un lockable
    if u get a no atr string it might not

    my advice m8 is use a fun card or atmega
    if u dont have unlooper



    bezo

  5. #5
    DF Member jahbarrie's Avatar
    Join Date
    Jul 2007
    Location
    Notts
    Posts
    31
    Thanks
    0
    Thanked:        0
    Karma Level
    0

    Default Re: smart card help pls

    i do get the atr string it just dont seem to get the ird and bk info. i've ordered a Phoenix Smartmouse Programmer. will that be able to get the info as the guide stated i needed to have a iso phoenix programmer plus its said that this programms most catds. this is what i get when i try to read eeprom
    ATR=3FFF9500FF918171A04700444E415350303131205265764230443C
    Info=DNASP011 RevB0D
    Retrieving card info...
    Send_Iso: Error!
    Send_Iso: Error!
    Send_Iso: Error!
    Card info retrieved
    Installing ghost provider...
    1.Dumping dataspace...
    Send_Iso: Error!
    Send_Iso: Error!
    Send_Iso: Error!
    Send_Iso: Error!
    Send_Iso: Error!
    Error dumping dataspace...
    Error Installing Ghost...

  6. #6
    R.I.P. the_wizzard's Avatar
    Join Date
    Oct 2000
    Location
    in the outside
    Posts
    5,297
    Thanks
    0
    Thanked:        2
    Karma Level
    609

    Default Re: smart card help pls

    if u got ur bk\ird then use a fun atmega tit opus and u can practise all u like! u cannot read or write to that rom crd just cos u have the right progger! and u will probl just fook it anyway read up on the info available around the net and on novice guide about doin mosc's cos its gonna need to be blokkered and its not summit to try on ur 1 and only card!
    xncs n.e romstudio all have there use's to edit rom cards after they been unlocked! but for yours u need a unlooper first.

  7. #7
    DF VIP Member BEZO's Avatar
    Join Date
    Jul 2001
    Location
    uk
    Posts
    3,182
    Thanks
    92
    Thanked:        39
    Karma Level
    654

    Default Re: smart card help pls

    am not sure about that m8

    i anit unlooped cards for a bit

    .have u try reading it in nagra.

    try not reading it and just write image to it.failing that there is a software called
    mrom that might clear the card.but only do it if u have ird and bk.

    i would do a fun card myself


    bezo
    Last edited by BEZO; 9th August 2007 at 01:23 AM.

  8. #8
    DF Member jahbarrie's Avatar
    Join Date
    Jul 2007
    Location
    Notts
    Posts
    31
    Thanks
    0
    Thanked:        0
    Karma Level
    0

    Default Re: smart card help pls

    fist like to say thanks bezo & wizzard for the help thus far.Respect!
    so basically if i use jtag get ird & bk then i can use nagra edit and do up a fun card right? i only jus got this box with the card and was told that the card could be reprog. so would still like to learn how to use mrom or XNCS1.8 to get info for educational purposes jus so i understand fully how this works. do you know anywhere i could get download of mrom as i'm following novice agenl and got this far jus need a little help to get the full undestanding a this thanks.

  9. #9
    DF VIP Member BEZO's Avatar
    Join Date
    Jul 2001
    Location
    uk
    Posts
    3,182
    Thanks
    92
    Thanked:        39
    Karma Level
    654

    Default Re: smart card help pls

    advice m8.

    like wot wizzard and i said.forget a rom card for now until u get
    some knowledge behind ya,do a fun card atmega etc.

    1s u have ya bk ird

    funcard u just need toxic and choas flash will take u 5 mins to do


    1.... Program a funcard
    2.... Use chaos ??.hex as flash, or in this case flash.hex

    3.... YOU DO NOT NEED AN INTERNAL EEPROM! this was for ppv but seeing as no longer available, no longer needed


    4.... For your external eeprom, using a toxic edit cam id to wot ever
    enter bk ird. click your area save it

    then write card


    usually au's within 2 mins, but allow up to 15 - 20 mins for reasons to do with key streaming at the minute.

  10. #10
    DF Member jahbarrie's Avatar
    Join Date
    Jul 2007
    Location
    Notts
    Posts
    31
    Thanks
    0
    Thanked:        0
    Karma Level
    0

    Default Re: smart card help pls

    ok m8 thanks for all your help, will get fun card later on and try that out. jus one more thing could you direct me to where i could find toxic and choas flash i got a chaos but it says for 2110 and i got a 2100c. if you could direct me as to where i can find this would help thanks.

Similar Threads

  1. O2 free sims card for M8's
    By malcyd in forum Cheapskates Corner
    Replies: 25
    Last Post: 27th September 2002, 07:48 PM
  2. Sky Card:Ne use 2 ne1?
    By Danger Mouse in forum Digital Satellite TV
    Replies: 4
    Last Post: 7th September 2002, 04:05 PM
  3. Sim Card
    By dondee in forum Unlocking Questions & Solutions
    Replies: 2
    Last Post: 2nd September 2002, 10:23 PM
  4. New flash card and programmer
    By lemaru in forum Old Skool Gaming & Retro
    Replies: 1
    Last Post: 30th August 2002, 09:41 AM
  5. use card in two boxes ?
    By Gunnzie in forum Digital Satellite TV
    Replies: 17
    Last Post: 28th August 2002, 01:41 PM

Social Networking Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •