B&Q part numbers for x-clamp mod bits

[macmilm]

For any interested cos the part numbers in the tutorials around the web are no longer valid.

B&Q bits for x-clamp modding

AVF-853760 = 5 x 16mm (Qty 10)

AVF-852336 = 5mm Steel Washers (Qty 10)

Nylon washers were near steel ones but not got part number.

The tuts usually say to get 15mm screws or 20mm then cut down to 15mm but the 16mm fit fine... cant seem to find any 15mm ones anywhere.

Good luck all.

[macmilm]

Also 4got 2 say.

The tutorials i read said you need a Torq 12 and Torq 7 to open case/inner case e.t.c

Not in my case I needed Torq 10 & Torq 8.

Not sure if US sizes differ to UK sizes or some xbox 360 differ due to manufacture date or country ??????

Mine is a UK bought (HMV) pretty much at time of release if that helps.

[Simate]

http://rbjtech.bulldoghome.com/pages...com/XClamp.htm

[bigrabbie]

xcellent link, have done this before, worked a treat

good info on the stuff from b&q,need to look and get some will come in handy

bigrabbie