Eurovox Max 2007 Red blue Box
for uk and ire
fix is outCode:http://www.megaupload.com/?d=R2VWHJ6S
I know its obvious to some but it might be helpful to point out that is NOT for the eurovox 2008
wot a fkin star!
dbox2 autoroll not fixed yet?
its meant to be opensource as well, these coders need to pass the info across
Vaguely spoke about this with tips earlier in the shout box...
Must be a way to find out the softcam/rom image these boxes are using and put it in a dbox2 image?
Needs to be more open source on the softcams, not just the images with the dbox/dreams...
DJ OD
Can someone point me towards a guide on what to do with the Eurovox 2008 fix please?
Never used the Eurovox before but my sister has one. I'm guessing it's similar to loading a new image on a dbox but i'm not sure.
Cheers
Last edited by Dinhosa; 10th April 2008 at 09:23 PM.
I dont know wot to do with it yet as its my first code change, but thanx wizzard for the file
Cheers
Jaffa
Easy when you know how, or where to look
How come Eurovox gets sorted 1st? Thought that was an older box to Dbox2 and the Dbox2 was superior?
get ya null cable and star app download easy but make sure u have correct files for box red blue or 08 model
If its a max check the grill on the top right of the box.
If you see the tuner coming down as far as 8 slots its a red max and if the tuner comes down as far as 12 slots its a blue max.
Check this then update appropriately.
just poached that info off another forum as i just been given one to play with as i dont have 1
Here's a guide posted by r.bate at techwatch on how to flash the eurovox, so all credit goes to him:
I have written this tutorial on how to re-flash your Eurovox with the patched firmware which was released today (10/04/08).
This should mean that keys do not need to be manually entered anymore.
YOU WILL NEED:
-Correct updated firmware for your eurovox model. (see this forum)
-A Computer with Serial port or USB to Serial Adaptor.
-RS232 NULL Modem cable.
-Eurovox (not connected to tv by coaxial/aerial leads)
WHAT TO DO:
-Take power cord out of the Eurovox.
-Connect your Eurovox to your Computer using Serial port / adaptor and RS232 Cable.
-Plug power cord into the Eurovox and put it into standby.
-Unzip the firmware download for your model.
-Open the .exe file within the unzipped folder.
-Click the UPLOAD button to save your current channel data.
-Select a place to store your channel data. (only temporary)
-Once this process is complete, you should hit the download button in the center of the window. (not channel data)
-This process should take around 150 seconds (2-3 minutes)
-When complete, you should click the download button on the channel data section.
-This will quickly put all of your channels back onto the box.
-When Complete, pull the power cord from the box.
-Disconnect your computer from the eurovox.
-Insert Power Cord into the eurovox.
-Press the power button on the remote or box itself.
***CONGRATULATIONS***
Your eurovox should now be re-flashed and should survive.
Ive tried these instruction(with the usb/serial adapter) and it worked a treat.
Thanx
Last edited by Jaffa; 12th April 2008 at 07:56 PM.
Cheers
Jaffa
Easy when you know how, or where to look
I for one was impressed with how quickly a fix came out for the eurovox. I did say to my folks it could be a while but they're all sorted now.
No sympathy for the devil; keep that in mind. Buy the ticket, take the ride...
Just a quick reply here. I updated my dads max V & it didn't auto-update today. Has anyone else had an AU problem with todays key change..?
No sympathy for the devil; keep that in mind. Buy the ticket, take the ride...
Social Networking Bookmarks