Echo Link 777 help

[Raptor]

have to admit im clueless in this area so give me some advice pls

A friend of mine has an Echlink 777 and has the firmwire version ALi 3329B series using the ALI Mini Upgrade 5.2 14-05-2008 via COM cable.

Now fill me on on what this box can do and what I need to make it "sing" a little more (polesat / showtime etc)

cheers

[Nibb]

Latest Soft - http://www.srsupport.com/downloads/EL-777FTA_061108.zip
Update procedure - http://www.srsupport.com/utilities/d...0procedure.pdf

[Raptor]

OK well i managed to update to a firmware named: sw.v1.3.7.bin and that apparently has polsta / showtime / digitv

is pointing to hotbird but still says channel scrambled

advice ?

[Raptor]

here is the receiver info page

bootloader 0.9.9 11/10/2007
maincode 1.3.7 11/6/2008
CAS_data 1.0.0 6/12/2007
defaultdb 1.0.2 26/5/2008
mcu version 1.1.2 22/4/2006
first use 25/10/2007
manufact. 147536
product XX8547F41

i have done the menu 20 20 / 21 21 and are both enabled

[Raptor]

Im kind of winging it here - am I right in that you have to add the keys manually ?

if yes i have started with polesat on NAGRA

here are the latest keys - but not sure which one to add:

Polsat 7001 and 7101: For 18/06/2008 12:14:44 Active Key 00

Updated by: kempa82
------------------------- ACTIVE KEY 00 -------------------------

HEX KEY
No Spaces: 0A0B647E181EC92E2D203596A12F0B23
With Spaces: 0A 0B 64 7E 18 1E C9 2E 2D 20 35 96 A1 2F 0B 23

DEC KEY
010 011 100 126 024 030 201 046 045 032 053 150 161 047 011 035
-----------------------------------------------------------------

>> TECHNOMATES SERIES 1000 MENU
--------------------------------------
Provider: Polsat 7001 SLOT 55
Lines

10: 0A 0B 64 7E 18 1E C9 2E
11: 2D 20 35 96 A1 2F 0B 23
--------------------------------------

>> FOR CAM MODULES
--------------------------------------
HEX Key
00-0: 0A 0B 64 7E 18 1E C9 2E
00-1: 2D 20 35 96 A1 2F 0B 23

DEC Key
00-0: 010 011 100 126 024 030 201 046
00-1: 045 032 053 150 161 047 011 035

[Raptor]

i tried 0A0B647E181EC92E2D203596A12F0B23 but it only saves 0A0B647E181EC92E and channel is still scrambled

help heh

[Raptor]

i tried the first 16 digits in active key 01 and the second lot of digits in active key 01 and still scrambled.

advice ?

[Nibb]

I was kind of winging it meself m8 as its a new receiver to me!

I got the info off www.satellites.co.uk

There is a decent echolink section on satpimps.....Ill have a nose.

[beerman]

My Comag SL65 has the same chipset. Yours is a SL35 clone from a little reseach.

Rap you are leaving it on a polsat channel to let it update aren't you?

You could try some of the firmwares posted on here:
http://satboard.uk.to/forum

I currently run the Truman 1.3.97 firmware which at first glance (don't hold me to it) should work on the SL35.

[Nibb]

http://www.satpimps.com/forum/forumdisplay.php?f=395

Dont see any indication of having to manually update keys.

[the_wizzard]

from what i see polsat and most are down on it! only digi tv on 1 west is working is au set to on?

For au, press menu on the remote, then press 2121, to enable or disable

you should get prem 19e and have to input keys for digi tv 1 west au needs to be set to off when doing that


to enter the keys press menu >tools> key editor then select viagra 2 then press right or left till you find digitv then enter.

Now you will have key OD pressing left and right you will change then to like OE OC and so on YOU must enter the keys to the provided KEY.

ALSO to get the letters say C press 2 four times on the remote. and so on Tongue


i know fook all about them just copied that off another forum


btw id be carefull about flashing it with other fw you could kill it.

[Raptor]

My Comag SL65 has the same chipset. Yours is a SL35 clone from a little reseach.

Rap you are leaving it on a polsat channel to let it update aren't you?

You could try some of the firmwares posted on here:
http://satboard.uk.to/forum

I currently run the Truman 1.3.97 firmware which at first glance (don't hold me to it) should work on the SL35.

for how long ?

and does it have to be pointed to a particular sat (its on hotbird 13 E atm)

also how can i edit keys to the bin from pc and then upload to stb ? i have a tool called maxeditor but not too sure on how to mess

thanks for the help so far

[Raptor]

im a bit lost on what 1e and 19w means - is that pointing the dish to a diff sat ?

[Raptor]

this is my bin file that i downloaded from the stb using maxeditor

[Nibb]

im a bit lost on what 1e and 19w means - is that pointing the dish to a diff sat ?

Yep Polsat is on 13°E....if the Wizzard is correct (more often than not he is) the you need to point it at 1°W

[Raptor]

this is an updated channels list that i got - masses of chans - i updated the box with maxeditor and it was a success. now i just need to know the score regarding keys etc.

[Raptor]

Yep Polsat is on 13°E....if the Wizzard is correct (more often than not he is) the you need to point it at 1°W

ok explain

if 13 E is correct for polsta - what do i need to point it to 1 W for ?

[the_wizzard]

id just stick it on 19 east premire seems to be the best option for now 1 west is for digi tv you will get same and more from premire 19 east which is right next to polsat but set auto update to on.

[Nibb]

So its auto update is it Wiz?

[the_wizzard]

So its auto update is it Wiz?

well it was from what i just quickly read about it au on tps polsat prem and digi tv
but only prem is working on au now so it seems so if all others are down on auto update it must be

http://www.wizardsatellite.co.uk/ind...roducts_id=429