1.) You need a patched version of Tomtom software - it will not work with the genuine software. If you are using a software version earlier than v8.010 it can be patched using the "RunMeforAllAutomatic".
2.) Copy new map folder to Tomtom (can also copy file named ' MapSettings.CFG' from old map folder to new map folder, this will keep your Home & Favourites locations).
3.) Make a note of your DeviceID - this is a 10 digit code eg. ABC12DEF34 . Open the document named DeviceID using notepad in the keygen folder and enter YOUR DeviceID code (NO SPACE) then save.
4.) Leave Tomtom connected to PC & on PC click on "RunMeforAllAutomatic" in the keygen folder.
5.) You will see this :-
Enter 1,2 or 3 for your Choice, Standard is 1
1. Run it for Navcore 8.010 and higher
2. Run it for Navcore 7 up to 8.002
3. Run it for Map 6
1-3 :
So Enter 1 after 1-3 :
6.) You will then see a list of all Available Drives - Enter the drive letter (eg - E ) of your Tomtom - do not add : or \
7.) Should now see this if successful (Map name will be different if using a different map):-
### Run Fake meta.txt Check ###
United_Kingdom_and_Republic_of_Ireland-15.meta v810 bld1870 Key seems to be OK
# Can not read ID from ttgo.bif #
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
### Run Keygen ###
h:\United_Kingdom_and_Republic_of_Ireland\United_Kingdom_and_Republic_of_Irelan
d-15.meta.dct exist already
h:\United_Kingdom_and_Republic_of_Ireland\United_Kingdom_and_Republic_of_Irelan
d-15.meta.dct exist
Used DeviceID = ABC12DEF34
Press any key to continue . . .
8.) Pressing any key will then close the "RunMeforAllAutomatic" - Remove Tomtom from PC - Tomtom will start up - first start up could take a few minutes.
Here's a copy of TTusers latest easyusetools keygen & latest meta files - dated 01-03-09 (& a copy of the guide I wrote included)
http://www.megaupload.com/?d=2I0GL5S2
Social Networking Bookmarks