Just built a new p4 system..
P4c 2.6 ghz 800fsb running @ 3.13ghz and stable on a Gigabyte Ga-8penxp mb
Just built a new p4 system..
P4c 2.6 ghz 800fsb running @ 3.13ghz and stable on a Gigabyte Ga-8penxp mb
Sorry image attached ...
My spec: Intel 1.7GHz
Intel 850 Motherboard
40gb 7200rpm HDD
12gb 7200rpm Maxtor DiamondMax HDD
256mb Ram 9 (need 2 upgrade)
17inch Flat panel LCD monitor
Crap Speakers
40x16x12 DVD & CD Re-writer Combo
Geforce 2 mx 400 32mb (crap want to upgrade)
CreativeAudio PCI sound card
Can i overclock???? If so how can i do it without upgrading my cpu fan or will that need 2 be done i just want it to run a little faster!!!!
Thank You
OK here's my full spec with all the fancy bits in:
<b>Asus A7N8X-X Motherboard</b><br>nVidia nForce 2 400 Chipset<br>AMD Athlon XP 400 FSB Ready<br>DDR400 (PC3200) Supported<br>AGP8X Supported<br>6-Channel Audio<br>Asus C.O.P. (CPU Overheating Protection)<br>Asus Q-Fan<br>USB2.0 Technology<br><b>AMD Athlon XP 2600+ (2.08GHZ) Processor</b><br>333FSB<br><b>Thermaltake Volcano 11 Xaser Edition CPU Cooler</b><br>Supports up to Athlon XP 3400+<br>Temperature Sensor<br>4800RPM<br><b>Dane-Elec 512MB DDR400 (PC3200) RAM</b><br><b>XFX nVidia GeForce FX 5200 Graphics Card</b><br>CineFX Engine<br>128 MB DDR<br>AGP8X<br>nView Multi-display Technology<br>Digital Vibrance Control 3.0 (DVC)<br>Unified Driver Architecture (UDA)<br>Microsoft DirectX 9.0 OpenGL 1.4 Optimization and Support<br><b>Nikimi NIK-XR300A Hard Drive</b><br>30GB Capacity<br>NTFS Formatted<br>7200RPM<br><b>Samsung SD-161Q</b><br>48x CD-ROM (Read)<br>16x DVD (Read)<br><b>Lite-On LTR 16102B</b><br>40x CD-ROM Read<br>16x CD-ROM (Write)<br><b>Eye-T Zorro Silver ATX Case</b><br>450WATT Dual Fan PSU<br>Large Side Window<br>2 Rear Case Fans<br>1 Side Blue LED Case Fan<br>Front Door To Devices With Z LED and Red HDD LEDs<br>Front Panel with 2x USB2.0, 2x Audio Connectors and 1x IEEE 1394 Port<br><b>Canon CanoScan LiDE 20 N67OU Flatbed Scanner</b><br>7200DPI<br><b>Creative Cambridge SoundWorks FPS1600 Speaker System</b><br>4 Mobile Speakers and 1 Sub Woofer<br><b>Microsoft Multimedia Keyboard and Optical Wheelmouse</b><br><b>Alcatel Speedtouch 330 ADSL Modem</b><br><b>Epson Stylus C40 UX Printer</b><br><b>17 Inch Monitor</b><br><b>Microsoft Windows XP Professional</b><br>Service Pack 1A<br><br><a href='images/about/workstationl.jpg'><img src='http://www.aslr97.dsl.pipex.com/images/about/wss.jpg'></a><br><br><a href='http://www.aslr97.dsl.pipex.com/images/about/workstationzooml.jpg'><img src='http://www.aslr97.dsl.pipex.com/images/about/wszs.jpg'></a><br><br><a href='http://www.aslr97.dsl.pipex.com/images/about/zorrol.jpg'><img src='http://www.aslr97.dsl.pipex.com/images/about/zorrocs.jpg'></a><br><br><a href='http://www.aslr97.dsl.pipex.com/images/about/zorroopenl.jpg'><img src='http://www.aslr97.dsl.pipex.com/images/about/zorroos.jpg'></a><br><br><a href='http://www.aslr97.dsl.pipex.com/images/about/zorrosidel.jpg'><img src='http://www.aslr97.dsl.pipex.com/images/about/zorrosides.jpg'></a><br><br><a href='http://www.aslr97.dsl.pipex.com/images/about/keyboardmousel.jpg'><img src='http://www.aslr97.dsl.pipex.com/images/about/kbs.jpg'></a>
3DMark03 Score: 932
My CPU is only at 166FSB but it can be overclocked to 400 which I think is an Athlon XP 3200+ Speed so mabe I may have to try
:thumbs
At present ive got my 2500 Barton running at 2400 (200*12) using a slk900 and a 92mm vantec stealth fan with temps at 45 on full load.
The only thing holding me back is my memory (corsair 3200 cas 2), i think its time for some nice new ocz sticks
fruity1967
them 1700 are sweet chips m8Originally Posted by Violator
what cooling are you using?
water/phase/air
fruity1967
got a XP1700 JIUHB DLT3C my self, running at default volts (1.5V) 210x10= 2.1Ghz, Abit NF7-s Mobo, reason why ive not pushed it higher is cos i dont like the loud noise of the fan! ive got a coolermaster aero 7 lite at half setting which is fairly quiet, so im getting best of both worlds
tempted top get a barton 2500 to push it up to 3200 speeds, but i hear the mobile bartons are here and run at much lower volts
Just ordered a M-Barton 2500 m8 :thumbs I'll let y'all know how it goes.
Just hope your multiplyer isn't locked. Recently overclocked my 1GHZ Athlon Thunderbird system upstairs. It's multiplyer was locked but i got it up quite a bit.
:thumbs
It's notOriginally Posted by Leeum
biggy you should turn up your voltage cause your ram is bloody good 3700 wow!2x256mb Twinmos PC3700
who cares about noise more power.
First tests with new Mobile 2500. 12 hour burn-in, she's currently running Prime @2.2Ghz 1.55v. Going for more when I get home providing it hasn't bailed out .
I overclocked my p4 to 3059mhz
lol eh nah im not gonna overclock
2.4Ghz @ 1.825v, will do 2.5Ghz @ 1.9v but leaving that till I get better cooling
Hi guys my pc is slowish and was wondering what this overclocking is and how i can do it......please can someone help??????
Cheers
Duffy
P4 Prescott 2.8 @ 3.84 275 FSB as seen on overclockersclub.com
And thats not bad for a so called crap prescott,,,,,,(long story) CPU ID
Abit IC7 Max 3 in a re-gassed Vapochill PE
Temps are 4 degrees idle 11 under heavy Prime 95
2600+ T-Bred B, 11 X 200 FSB 1.70V, just nocked her down to 1.65 as i was getting 58/ 59°C with SETI@Home running for a good 3 hours.
:thumbs
i use to have a amd mobile 2500 running at 2.5gh may i sugest if anyone is a speed freak the ygetthem selves over to cpucity and order a mobile cpu the ones on their now have been hittin 2.7 by some people but ulll definelty get 2.5
i got my dual xeon 2.2 going at 2685MHz can run at 2.8 but craps out when it gets into windows and u wanna open anything
My best yet not bad for an xp2500 mobile... Picked this up from cpucity yesterday well chuffed :thumbs
Social Networking Bookmarks