Xecuter LT Switch – Easy Switch For Liteon 94850, 83850 and 93450 DVD Drives

[Raptor]

From team-xecuter.com:

After a great deal of requests we have designed a simple switch for all the Liteon drives that enables firmware full read/write. We have also included an On/OFF Led to show correction operation when switching to 0×72 vendor mode.

The installation is very simple and takes about 60 seconds if you have some small experience with a soldering iron. It has been tested with the original DOSFLASH methods and also the new Jungle Flasher 0.1.69. All Liteon drive version have been tested with 100% Success. There is no need to remove the LT Switch after it has been installed - simply switch to normal mode.

On Sale Now £4.95 / $7.95

Official Site: http://team-xecuter.com

[flik]

How easy are these to re use Rap for doing multiple drives ?

EDIT : I see you can desolder them but you have to repair the cut trace after. What's the best way to repair a cut trace ? Can you just blob some solder onto it to rejoin ?

[XBOX4LIFE]

Yeah, either leave it in place n flick a switch to disable or remove and resolder cut tracks Nice bit of kit

[Mystical_2K]

excellent bit of kit, will be getting one of these for my new arcade unit

[Neo\nsc]

Nice kit

[rids]

How easy are these to re use Rap for doing multiple drives ?

EDIT : I see you can desolder them but you have to repair the cut trace after. What's the best way to repair a cut trace ? Can you just blob some solder onto it to rejoin ?

if you plan to remove it and re solder there is know point in it only worth it if u leave it in place as you have to cut the tracks all the switch will do is rejoin them

[Raptor]

How easy are these to re use Rap for doing multiple drives ?

EDIT : I see you can desolder them but you have to repair the cut trace after. What's the best way to repair a cut trace ? Can you just blob some solder onto it to rejoin ?

just buy a bunch of them at a big discount you cheap fuck lol