lost �Via digital� 30w

[madog33]

Since updating my cam patch to the latest (humax 5400z) one I can�t get �Via digital� 30w I have the latest pet123 setting and have tried DaveM Xamuh 6 in 1 and satkos with a fun card do I need any new PMC tables loaded?

[the_wizzard]

it may be down to your dish lnb? as i have same prob sort of? i get all(via+cabo) except palcos ppv and i know all my settings files are ok.

havent we been on the same thread at dudz about this??


booboo

[madog33]

don't know if it the LNB as they was working!

[the_wizzard]

ha ha, mines working fine aswell, but somtimes you need sommit better? as i do, but explore all avenues first m8, why waste money?? it looks like im gonna have to splash out it was due for a change anyway(in my case) good luck.

booboo

[madog33]

i've just tryed my dad's humax 5400z (patched with latest patch)
on my moto system with a NEW lnb and still can't get "via digital"
i get 97% signal, let me know if you get it!
Thanks

[the_wizzard]

just seen this post on tony does........

Hispasat 1D which is presently under tests at 26W should replace 1A and 1B at 30W (both satellites are 10 years old and at the end of their expected life period). And it's footprint is significantly wider, which brings me to the conclusion that most of us in Europe should soon enjoy in Palco, AXN and a few other low-signal programmes. That's what I have concluded from publicly available information. Does anyone have any other information on that ?


booboo

[Ragnarok666]

I must be lucky down here, i get palco just fine on my 60cm dish, my reciever reads 97% quality.

[the_wizzard]

just out of interest can you post your settings for your palcos


booboo

[madog33]

Thanks guy�s got it all working now inc �via digital� 30w it was my programmer software everything back on f**king great! thanks to all again ;-)

[pop]

palco 30 west no prob withmm