Failed Liteon Flash?

[criminalben]

I don't know if it's me or the drive.

I had a liteon drive and somehow the tray got snapped off. I used JF to read the firmware out, merged with latest LT and flashed to a new drive. I accidentally did Liteon Erase, then Erase, Then Write where I could probably have skipped the Erase bit, but anyway.

I put the console back together, it plays Music CD's, but won't read Games, copied or original. I either get Open Tray or Unplayable Disc.

Have I done a bad flash or is it just a defective drive?

[rids]

was it the same model liteon

[criminalben]

Yeah, a DG-16D2S / 74850

[flik]

I would reflash it mate using the original firmware from the old drive. Maybe even re read the firmware from the old drive 1st ! Or you could just swap the boards over between the 2 drives.

[plug1]

The key is wrong . That's the symptom of bad key

[plug1]

If its the same drive just swop the board from the fooked one to the good one

Plug.

Or cook the firm with jf and use dos flash.

[criminalben]

OK thanks, I'll connect up the old drive and re-read the key.

Cheers.

[XBOX4LIFE]

If its the same drive just swop the board from the fooked one to the good one

Plug.

Or cook the firm with jf and use dos flash.

Why use dosflash when you already have Jungle Flasher open to patch the fw ??
Dump both drives and compare the fw

[psxcity]

wouldnt it be easier just to swap trays over???

[plug1]

Why use dosflash when you already have Jungle Flasher open to patch the fw ??
Dump both drives and compare the fw

Just because that's the way I do liteon.
All the drives are the same , just the firm that had new protection added
So if iv got a cooked file for it I just corrupt the flash , and screw the security
And use the power cycle trick to flash.

Plug